BTS 640 S2
Semiconductor Group
Page 15
2003-Oct-01
Package and Ordering Code
All dimensions in mm
Standard (=staggered): P-TO220-7-11
Sales code
Ordering code
BTS640S2
Q67060-S6307-A5
SMD: P-TO263-7-2
(tape&reel)
Sales code
Ordering code
BTS640S2 G
Q67060-S6307-A6
Ordering code
Q67060-S6307-A6
Straight: P-TO220-7-12
Sales Code
Ordering code
BTS640S2 S
Q67060-S6307-A7
Published by
Infineon Technologies AG
,
St.-Martin-Strasse 53,
D-81669 München
Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and
shall not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited
to warranties of non-infringement, regarding circuits, descriptions
and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions
and prices please contact your nearest Infineon Technologies Office
in Germany or our Infineon Technologies Representatives
worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous
substances. For information on the types in question please contact
your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support
devices or systems with the express written approval of Infineon
Technologies, if a failure of such components can reasonably be
expected to cause the failure of that life-support device or system,
or to affect the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted in the
human body, or to support and/or maintain and sustain and/or
protect human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
Typical
All metal surfaces tin plated, except area of cut.
±0.1
1.27
4.4
9
±
0.05
1)
C
2.4
0.5
±0.1
±
8
1
±0.4
3.9
±0.4
8.4
3
±
A
A
0.25
M
9.8
±0.15
8.5
1)
3.7
-0.15
2
1
1
1
±
0...0.15
1.27
0.6
±0.1
C
±
1
10
±0.2
7x
A
8 max.
B
A
0.25
M
0.1
Typical
All metal surfaces tin plated, except area of cut.
9.8
±0.15
±0.2
10
8.5
1)
8
1
(
±
9
±
1
0...0.15
7x0.6
±0.1
±0.1
1.27
B
4.4
0.5
±0.1
±
2
4
±
0.05
1)
0.1
±
1
2.4
6x1.27
A
B
A
0.25
M
Typical
All metal surfaces tin plated, except area of cut.
9.8
±0.15
8.5
1)
3.7
-0.15
2
1
1
1
±
0...0.15
1.27
0.6
±0.1
±0.1
1.27
4.4
B
9
±
0.05
1)
C
±
1
±
10
±0.2
C
2.4
0.5
±0.1
1
±
1
7x