- 您現在的位置：買賣IC網 > PDF目錄69257 > PTN78060HAST (TEXAS INSTRUMENTS INC) 1-OUTPUT 45 W DC-DC REG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | PTN78060HAST |
| 廠商： | TEXAS INSTRUMENTS INC |
| 元件分類： | 電源模塊 |
| 英文描述： | 1-OUTPUT 45 W DC-DC REG PWR SUPPLY MODULE |
| 封裝： | DIP-7 |
| 文件頁數： | 6/28頁 |
| 文件大?。?/td> | 1948K |
| 代理商： | PTN78060HAST |
第1頁第2頁第3頁第4頁第5頁當前第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁
www.ti.com
Tantalum Capacitors
Capacitor Table
Designing for Load Transients
PTN78060W, PTN78060H
SLTS229A – NOVEMBER 2004 – REVISED APRIL 2005
Tantalum-type capacitors may be used at the output, and are recommended for applications where the ambient
operating temperature can be less than 0
°C. The AVX TPS, Sprague 593D/594/595, and Kemet
T495/T510/T520 capacitors series are suggested over many other tantalum types due to their rated surge, power
dissipation, and ripple current capability. As a caution, many general-purpose tantalum capacitors have
considerably higher ESR, reduced power dissipation, and lower ripple current capability. These capacitors are
also less reliable as they have lower power dissipation and surge current ratings. Tantalum capacitors that do not
have a stated ESR or surge current rating are not recommended for power applications. When specifying
Os-Con and polymer tantalum capacitors for the output, the minimum ESR limit is encountered well before the
maximum capacitance value is reached.
The capacitor tables, Table 5 and Table 6, identify the characteristics of capacitors from a number of vendors
with acceptable ESR and ripple current (rms) ratings. The recommended number of capacitors required at both
the input and output buses is identified for each capacitor type. This is not an extensive capacitor list. Capacitors
from other vendors are available with comparable specifications. Those listed are for guidance. The rms rating
and ESR (at 100 kHz) are critical parameters necessary to ensure both optimum regulator performance and long
capacitor life.
The transient response of the dc/dc converter has been characterized using a load transient with a di/dt of
1 A/s. The typical voltage deviation for this load transient is given in the data sheet specification table using the
required value of output capacitance. As the di/dt of a transient is increased, the response of a converter's
regulation circuit ultimately depends on its output capacitor decoupling network. This is an inherent limitation of
any dc/dc converter once the speed of the transient exceeds its bandwidth capability. If the target application
specifies a higher di/dt or lower voltage deviation, the requirement can only be met with additional output
capacitor decoupling. In these cases, special attention must be paid to the type, value, and ESR of the
capacitors selected.
If the transient performance requirements exceed those specified in the data sheet, the selection of output
capacitors becomes more important. Review the minimum ESR in the characteristic data sheet for details on the
capacitance maximum.
Table 5. Recommended Input/Output Capacitors (PTN78060W)
CAPACITOR CHARACTERISTICS
QUANTITY
85
° C
CAPACITOR VENDOR/
EQUIVALENT
VENDOR
WORKING
MAXIMUM
PHYSICAL
COMPONENT
VALUE
SERIES
INPUT
OUTPUT
NUMBER
VOLTAGE
RIPPLE
SIZE
SERIES
(F)
RESISTANCE
BUS
(V)
CURRENT
(mm)
(ESR) (
)
(IRMS) (mA)
Panasonic FC( Radial)
50
180
0.119
850
10
× 16
1
EEUFC1H181
FK (SMD)
50
330
0.12
900
12.50
× 13.5
1 (1)
1
EEVFK1H331Q
United Chemi-Con PXA (SMD)
16
180
0.016
4360
8
× 12
≤1
PXA16VC180MF60
1 (1)
(VO < 14 V)
LXZ
50
120
0.16
620
10
× 12,5
1
LXZ50VB121M10X12LL
1(1)
(VI < 32 V)
MVY(SMD)
50
100
0.300
500
10
× 10
1
MVY50VC101M10X10TP
(VO ≤ 5.5 V)
Nichicon UWG (SMD)
50
100
0.300
500
10
× 10
1
UWG1H101MNR1GS
F550 (Tantalum)
10
100
0.055
2000
7,7
× 4,3
N/R (2)
≤ 3(3)
F551A107MN (VO ≤ 5 V)
HD
50
120
0.072
979
10
× 12,5
1
UHD1H151MHR
Sanyo Os-Con SVP (SMD)
20
100
0.024
2500
8
× 12
1 (1)
≤ 2
20SVP100M (VI ≤ 16 V)
SP
16
100
0.032
2890
10
× 5
1 (1)
≤ 2
16SP100M (VI ≤ 14 V)
(1)
The voltage rating of the input capacitor must be selected for the desired operating input voltage range of the regulator. To operate the
regulator at a higher input voltage, select a capacitor with the next higher voltage rating.
(2)
Not recommended (N/R). The voltage rating does not meet the minimum operating limits in most applications.
(3)
The maximum voltage rating of the capacitor must be selected for the desired set-point voltage (VO ). To operate at a higher output
voltage select a capacitor with a higher voltage rating.
14
相關PDF資料 |
PDF描述 |
|---|---|
| PTN78060HAH | 1-OUTPUT 45 W DC-DC REG PWR SUPPLY MODULE |
| PTN78060WAZ | 1-OUTPUT 45 W DC-DC REG PWR SUPPLY MODULE |
| PTN78060HAZT | 1-OUTPUT 45 W DC-DC REG PWR SUPPLY MODULE |
| PTN78060WAD | 1-OUTPUT 45 W DC-DC REG PWR SUPPLY MODULE |
| PTN78060HAZ | 1-OUTPUT 45 W DC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PTN78060HAZ | 功能描述:DC/DC轉換器 3A Wide-In Wide Output Adj Module RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓（標稱）: 輸出端數量:1 輸出電壓（通道 1）:3.3 V 輸出電流（通道 1）:600 mA 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:SMD/SMT 封裝 / 箱體尺寸: |
| PTN78060HAZT | 功能描述:DC/DC轉換器 3A Wide-In Wide Output Adj Module RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓（標稱）: 輸出端數量:1 輸出電壓（通道 1）:3.3 V 輸出電流（通道 1）:600 mA 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:SMD/SMT 封裝 / 箱體尺寸: |
| PTN78060W | 制造商:TI 制造商全稱:Texas Instruments 功能描述:3-A, WIDE-INPUT ADJUSTABLE SWITCHING REGULATOR |
| PTN78060W_09 | 制造商:TI 制造商全稱:Texas Instruments 功能描述:3-A, WIDE-INPUT ADJUSTABLE SWITCHING REGULATOR |
| PTN78060WAD | 功能描述:DC/DC轉換器 3-A Wide-Input Adj Swtch Reg Mod RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓（標稱）: 輸出端數量:1 輸出電壓（通道 1）:3.3 V 輸出電流（通道 1）:600 mA 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:SMD/SMT 封裝 / 箱體尺寸: |
發布緊急采購，3分鐘左右您將得到回復。