- 您現在的位置：買賣IC網 > PDF目錄69110 > PSA361-7IP (POWER-ONE INC) 1-OUTPUT 43.2 W DC-DC REG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | PSA361-7IP |
| 廠商： | POWER-ONE INC |
| 元件分類： | 電源模塊 |
| 英文描述： | 1-OUTPUT 43.2 W DC-DC REG PWR SUPPLY MODULE |
| 文件頁數： | 3/13頁 |
| 文件大?。?/td> | 216K |
| 代理商： | PSA361-7IP |
PSA Series Extended Data Sheet
Positive Switching Regulator (Rugged)
REV. SEP 23, 2003
Page 11 of 13
Table 9: Safety concept leading to an SELV output circuit
Conditions Front end
Switching regulator
Result
Supply
Minimum required grade
Maximum
Minimum required safety
Measures to achieve the
Safety status of
voltage
of isolation, to be provided DC output
status of the front end
specified safety status of the
the switching
by the AC-DC front end,
voltage
output circuit
regulator output
including mains-supplied from the
circuit
battery charger
front end 1
Battery
Double or Reinforced
≤60 V
SELV circuit
None
SELV circuit
supply,
≥60 V
Earthed hazardous voltage Input fuse 3 and
Earthed SELV
considered
secondary circuit 2
non accessible case 5
circuit
as secon-
Unearthed hazardous
Input fuse 3 and unearthed,
Unearthed SELV
dary circuit
voltage secondary circuit 5
non accessible case 5
circuit
Hazardous voltage
Input fuse 3 and earthed output Earthed SELV
secondary circuit
circuit 4 and non
circuit
accessible case 5
Mains
Basic
≤60 V
Earthed SELV circuit 4
None
-250 V AC
ELV circuit
Input fuse 3 and earthed output
≥60 V
Hazardous voltage
circuit 4 and non
secondary circuit
accessible case 5
Double or reinforced
≤60 V
SELV circuit
None
SELV circuit
≥60 V
Double or reinforced insu-
Input fuse 3 and unearthed
Unearthed SELV
lated unearthed hazardous and non accessible case 5
circuit
voltage secondary circuit 5
1 The front end output voltage should match the specified input voltage range of the switching regulator.
2 The conductor to the Gi– terminal of the switching regulator has to be connected to earth by the installer according to the relevant
safety standard, e.g. IEC/EN 60950.
3 The installer shall provide an approved fuse (slow blow type with the lowest current rating suitable for the application, max. 12.5 A) in
a non-earthed input conductor directly at the input of the switching regulator. If Vo+ is earthed, insert the fuse in the Gi- line. For UL’s
purpose, the fuse needs to be UL-listed. If option C is fitted, a suitable fuse is already built-in in the Vi+ line.
4 The earth connection has to be provided by the installer according to the relevant safety standard, e.g. IEC/EN 60950.
5 Has to be insulated from earth by double or reinforced insulation according to the relevant safety standard, based on the maximum
output voltage from the front end.
Safety of Operator Accessible Output Circuit
If the output circuit of a switching regulator is operator-ac-
cessible, it shall be an SELV circuit according to IEC/EN
60950 related safety standards
The following table shows some possible installation con-
figurations, compliance with which causes the output cir-
cuit of the switching regulator to be an SELV circuit ac-
cording to IEC/EN 60950 up to a nominal output voltage of
30 V.
However, it is the sole responsibility of the installer or user
to assure the compliance with the relevant and applicable
safety regulations.
More information is given in: Technical Information: Safety
& EMC.
Standards and Approvals
All switching regulators are UL recognized according to
UL 1950 and EN 60950 and UL recognized for Canada to
CAN/CSA C22.2 No. 234-M90.
The units have been evaluated for:
Building in,
Functional insulation from input to output and input/out-
put to case,
The use in an overvoltage category II environment,
The use in a pollution degree 2 environment.
The switching regulators are subject to manufacturing sur-
veillance in accordance with the above mentioned UL and
CSA and with ISO 9001 standards.
Protection Degree
The protection degree is IP 40, IP 20 with option P.
Isolation
Electric strength test voltage between input intercon-
nected with output and case: 1500 V DC, 1 s.
This test is performed as factory test in accordance with
IEC/EN 60950 and UL 1950 and should not be repeated in
the field. Power-One will not honour any guarantee claims
resulting from electric strength field tests.
相關PDF資料 |
PDF描述 |
|---|---|
| PSA241.5-7IR | 1-OUTPUT 36 W DC-DC REG PWR SUPPLY MODULE |
| PSA151.5-7IP | 1-OUTPUT 22.5 W DC-DC REG PWR SUPPLY MODULE |
| PSA241.5-9IR | 1-OUTPUT 36 W DC-DC REG PWR SUPPLY MODULE |
| PSA361-9IP | 1-OUTPUT 43.2 W DC-DC REG PWR SUPPLY MODULE |
| PSA151.5-9IP | 1-OUTPUT 22.5 W DC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PSA361-7iR | 功能描述:DC/DC轉換器 Switching Regulator 36W (36V) RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓（標稱）: 輸出端數量:1 輸出電壓（通道 1）:3.3 V 輸出電流（通道 1）:600 mA 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:SMD/SMT 封裝 / 箱體尺寸: |
| PSA361-9IR | 制造商:Power-One 功能描述:DCDC - Bulk |
| PSA3920C-LF | 制造商:ZCOMM 制造商全稱:ZCOMM 功能描述:Telecommunications |
| PSA39-21EWA | 功能描述:LED 顯示器和配件 AlphaNum Red 625nm Common Anode RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
| PSA39-21GWA | 功能描述:LED 顯示器和配件 AlphaNum Grn 568nm Common Anode RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。