TPS61165DRVR
TI
2016+
SON-6
5000多家會員為您找貨報價,SO EASY!
With a 40-V rated integrated switch FET, the TPS61165 device is a boost converter that drives LEDs in series. The boost converter runs at a 1.2-MHz fixed switching frequency with 1.2-A switch current limit, allowing the use of a high-brightness LED in general lighting.
The default white LED current is set with the external sensor resistor Rset, and the feedback voltage is regulated to 200 mV, as shown in Typical Application. During the operation, the LED current can be controlled using the one-wire digital interface (EasyScale protocol) through the CTRL pin. Alternatively, a pulse-width-modulation (PWM) signal can be applied to the CTRL pin through which the duty cycle determines the feedback reference voltage. In either digital or PWM mode, the TPS61165 device does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open-LED protection that disables the TPS61165 device to prevent the output from exceeding its absolute maximum voltage ratings during open LED conditions.
電話:0755-82565693
聯(lián)系人:陳先生/杜小姐/蘇小姐 (先生)
QQ:
郵箱:754034294@qq.com
地址:深圳市福田區(qū)華強北路深紡大廈A座907室
100%產(chǎn)品查看率
會員等級
會員年限