產品信息

深圳市誠逸隆科技供應經銷ROGERS羅杰斯板材,公司只做原裝,假一賠十

 

3001 Bonding Film (Thermoplastic Chloro-fluorocopolymer)
Recommended for bonding low dielectric constant PTFE  microwave stripline packages and other multilayer circuits. It may also be used to bond other structural and electrical components to the dielectric.

RO3000? and RO3200? series High Frequency Laminates (PTFE/Ceramic)

High frequency circuit materials used in commercial microwave and RF applications. They offer exceptional electrical and mechanical stability at competitive prices.

RO4000? Series High Frequency Circuit Materials (Woven glass reinforced, ceramic filled thermoset)
Laminates and prepregs designed to offer superior high frequency performance and low cost circuit fabrication. The result is low loss materials that can be fabricated using standard epoxy/glass (FR4) processes offered at a competitive price.

RT/duroid? 5870/5880 Glass Microfiber Reinforced PTFE Composites

These materials are designed for exacting stripline and microstrip circuit applications.

RT/duroid? 6002, 6202, 6006, 6010 PTFE/Ceramic Laminates
Offered in four grades. RT/duroid? 6002, 6202, 6006 and 6010 laminates are ceramic-PTFE composites offering superior electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable.

TMM? Thermoset Microwave Laminates (Thermoset ceramic loaded plastic)

Designed for high reliability stripline and microstrip applications. TMM laminates are available in a wide range of dielectric constants and claddings.

ULTRALAM? 2000 Woven Glass PTFE Laminates

Microwave laminates designed for high reliability stripline and microstrip circuit applications.

ULTRALAM? 3000 Series Liquid Crystalline Polymer Circuit Materials
A double-clad copper laminate, with the temperature resistant liquid crystalline polymer as a dielectric film.

 

 

LONGLITE? Flex 200 Adhesiveless Materials
Single sided, adhesiveless laminates specifically designed for thinner flex circuit constructions.

LONGLITE? Flex 300 Adhesiveless Series
Thin dielectric, double-clad, adhesiveless laminates designed to meet todays high performance inteconnection requirements.

R/flex? 1000 Circuit Materials for Long-life Dynamic Flexing
High performance polyimide film-based laminates with rolled annealed copper foil and coversheets ideally suited for constructing single and double sided flexible circuitry.

R/flex? 1100 Circuit Materials - High Temperature Laminates
High performance flexible circuit material system, designed for use in harsh, high temperature environments.

R/flex? 1500 Assembly Adhesive
Unsupported (without backing) dry film adhesive especially designed to meet the demanding requirements of electronics assembly operations.

R/flex? 2001 Laminates and Coverfilms
High performance circuit material system, especially formulated for high peel strength and IPC-FC-241 and 232/1 performance.

R/flex? 2005 Laminates and Coverfilms
Material system consisting of polymide film based laminates with rolled annealed copper foil, cover sheet, bonding film. Delivers:

  • wide process latitude
  • high bond strength
  • solvent resistance
  • improved electrical performance in critical applications due to low moisture absorption and closely controlled adhesive thickness

R/flex? 8080 Liquid Photoimageable Covercoat
Enables ultra-fine patterns needed for todays high-density flexible printed circuits Designed for manufacturing high precision patterns unattainable through conventional screen printing. Provides uniform coverage and reliable performance in mass production processes.

R/flex CRYSTAL? Laminates and Coverlayers
Flame retardant epoxy adhesive technology base on a new film Copper-clad laminates with rolled annealed and electrodeposited copper foils well suited for constructing single and double sided flexible circuitry.

R/flex JADE? Series
Flexible copper-clad laminate material – the next generation of industry-leading R/flex CRYSTAL? epoxy Halogen-free flame retardant flexible material engineered especially to meet increasing environmental requirements without compromising performance in todays demanding flexible circuit designs.

  • HT-1200 series - General Purpose Silicone Rubber
  • HT-6000 Series - Peformance Solid Silicones

PORON? Microcellular Urethanes for Gasketing and Sealing Products

  • PORON? 4701-30
    Very soft, easily compressed for use where flexibility is a key requirement.  Standard available  thickness range from 0.021"
  • PORON? 4701-40
    Soft material for a wide variety of applications.  Standard available thickness range from 0.031" to 0.500" (0.79 mm to 12.7 mm).
  • PORON? 4701-41
    Soft, enhanced sealability material offering greater closed-cell content for demanding vacuum sealing applications or low closure-force requirements.  Standard available thickness range from 0.031" to 0.500" (0.79 mm to 12.7 mm).
  • PORON? 4701-50
    Firm material used for managing high energy impact with gasketing needs.  Standard available thickness range from 0.012" to 0.500" (0.30 mm to 12.7 mm). 
  • PORON? 4701-60
    Very firm material used for energy management solutions for enclosure gasketing applications.  Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm)
  • PORON? 4790-92
    Extra soft, slow rebound with the lowest closure force.  Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm).
  • PORON? Soft Seal
    Designed for superior sealing at 6 pounds per cubic foot, this material is the lowest density offering in the PORON urethane product line.
  • PORON? ThinStik? 92-12 Series
    PORON ThinStik is an all-in-one solution, combining Rogers’ industry leading 92-12 PORON Urethane with a pressure-sensitive adhesive layer built right into its construction. This innovation enables higher compressibility than traditional laminated adhesive constructions to help designers meet the demands of ultra-thin gap-filling applications.

PORON? Microcellular Urethanes for Gasketing and Sealing Products

  • PORON? 4701-30
    Very soft, easily compressed for use where flexibility is a key requirement.  Standard available  thickness range from 0.021"
  • PORON? 4701-40
    Soft material for a wide variety of applications.  Standard available thickness range from 0.031" to 0.500" (0.79 mm to 12.7 mm).
  • PORON? 4701-41
    Soft, enhanced sealability material offering greater closed-cell content for demanding vacuum sealing applications or low closure-force requirements.  Standard available thickness range from 0.031" to 0.500" (0.79 mm to 12.7 mm).
  • PORON? 4701-50
    Firm material used for managing high energy impact with gasketing needs.  Standard available thickness range from 0.012" to 0.500" (0.30 mm to 12.7 mm). 
  • PORON? 4701-60
    Very firm material used for energy management solutions for enclosure gasketing applications.  Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm)
  • PORON? 4790-92
    Extra soft, slow rebound with the lowest closure force.  Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm).
  • PORON? Soft Seal
    Designed for superior sealing at 6 pounds per cubic foot, this material is the lowest density offering in the PORON urethane product line.
  • PORON? ThinStik? 92-12 Series
    PORON ThinStik is an all-in-one solution, combining Rogers’ industry leading 92-12 PORON Urethane with a pressure-sensitive adhesive layer built right into its construction. This innovation enables higher compressibility than traditional laminated adhesive constructions to help designers meet the demands of ultra-thin gap-filling applications.

PORON Medical? Urethanes Products

  • DermaBak? Advanced Dermal Materials
    Specifically designed for use in wound dressing backings, DermaBak foam membranes provide long-term comfort, good conformability and breathability, and low coefficients of friction with minimum staining and soiling. These materials can also be used in transdermal patches, IV site dressings, and EKG pads.
  • PORON Medical? Urethane - Firm - Energy Absorbing

PORON Medical? Urethanes offer high-energy return and excellent impact absorption.

  • PORON Medical? Urethane - Slow Recovery - Custom Contouring
    PORON Medical? Slow Recovery urethane is a unique custom contouring material. This material rebounds slowly when compressed, which results in a custom fit or contour during each use. The material will continue to return to its original shape when not in use. Slow Recovery is available in Soft, Very Soft, Firm and Very Firm.
  • PORON? 4708 Soft Cushioning

PORON 4708 Soft Cushioning materials have a density of 15 pounds per cubic foot. 

  • PORON? 4708 Soft Supporting

PORON 4708 Soft Supporting materials have a density of 20 pounds per cubic foot.


高頻印制板（ＨＦＰＣＢ）：適用微波傳輸電子產品
單面印制板（SPCB）：基材FR4
雙面印制板（SPCB）：基材FR4
多層印制板(MPCB)：基材FR4、PP
高密度印制板（HDIPCB）：含埋/盲孔，適用BGA電子產品
鋁基印制板：適用大功率散熱電子產品 

 產品類型
單面板/雙面板/多層板3-16層
常用基材
高頻板材FR-4、CEM-3
鋁基板材
陶瓷板材
板厚度
內層芯片0.10-1.50mm
總厚度 0.20-5.0mm
板厚公差
內層芯最大公差  ±0.08mm
總厚度公差  ±0.15mm
銅箔厚  17-175μm

最大加工面積  1100×500mm
最小產品面積  2×2mm
最小孔徑  0.2mm/8mil
最小線寬  0.10mm/5mil
最小間距  0.10mm/5mil
阻焊油墨 （Tamura）Dsr-2200（NANIA）LP-3G（Solder Mask）
外形加工精度  0.15mm
表面處理
噴錫沉金 
      鍍鎳/金（硬金） OSP涂膜（抗氧化板）
內層對位公差  ±0.10mm

黃小姐

電話:0755-82964732         傳真:0755-82964576

Email:sales@cenyion.com    www.cenyion.com

QQ:63857848               MSN:honghua_3@hotmail.com

地址：深圳市福田區深南中路3027號嘉匯新城匯商中心0821

　
查看更多

公司介紹

深圳市誠逸隆科技有限公司是一家集國際貿易、生產、開發、服務于一體的多方位發展公司，下屬部門設有IC事業部，LED事業部。 IC事業部：主要經銷世界各名牌廠家生產的高科技含量偏冷門、軍工級、工業級電子元件為主，致力服務于軍工，航空航天,通訊、通信,醫療,石油勘探及工業控制設備，移動通信基站、直放站、衛星通信、有線電視、雷達、電腦和電腦周邊設備、以及儀器儀表等領域。 作為電子工業產品的分銷商，能夠為客戶提供全球1000多家專業生產廠商的250，000多種產品，滿足客戶設計、試驗、小批量生產、維修、工程等少量產品需求。產品涵蓋電子元器件，電氣元器件、電線電纜及附件、連接器、開關、繼電器、傳感器、變壓器、電機、機箱、風機、檢測儀器儀表、指示燈、防靜電產品、工具、存儲產品、安全防護產品、液壓、氣動元器件等五十三大類。 LED事業部：主要生產大功率LED、白光LED、子彈頭LED、草帽LED、鋼盔LED、圓頭LED、藍光LED、異形LED、食人魚LED、貼片LED、小蝴蝶LED、雙色全彩LED等,是一家專門從事LED產品的高科技企業。秉承專業精致的開發理念，以技術創新為公司持續發展的核心競爭力，發揚持久用心的合作精神，通過自身不懈的努力，逐步完善公司技術、管理、市場、服務等體系，從而保證了公司高速持續的發展態勢，為新型光源、綠色照明竭盡全力！ 在未來的發展中，我們將奮發努力， 以專業的核心能力，豐富的管理經驗和具有積極務實的銷售團隊，本著“品質為大，承諾是金”的企業宗旨，我們將竭誠為海內外客戶提供高品質、具有價格競爭優勢的產品和及時周到的服務，為客戶打造具有世界競爭能力的產品，奉上盡善盡美的產品和服務。在此，衷心感謝新老用戶對我們的關心和支持，真誠的希望我們的合作能給您帶來更好的收益！
查看更多