• <ins id="tr6a3"><ul id="tr6a3"><big id="tr6a3"></big></ul></ins>
    參數資料
    型號: PQ48033HMA30PRF
    廠商: SYNQOR INC
    元件分類: 電源模塊
    英文描述: 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
    文件頁數: 14/14頁
    文件大小: 792K
    代理商: PQ48033HMA30PRF
    BASIC OPERATION AND FEATURES
    The
    PowerQor series converter uses a two-stage power circuit
    topology. The first stage is a buck-converter that keeps the out-
    put voltage constant over variations in line, load, and temper-
    ature. The second stage uses a transformer to provide the func-
    tions of input/output isolation and voltage step-down to achieve
    the low output voltage required.
    Both the first stage and the second stage switch at a fixed fre-
    quency for predictable EMI performance. Rectification of the
    transformer’s output is accomplished with synchronous recti-
    fiers. These devices, which are MOSFETs with a very low on-
    state resistance, dissipate far less energy than Schottky diodes.
    This is the primary reason that the
    PowerQor converter has such
    high efficiency, even at very low output voltages and very high
    output currents.
    Dissipation throughout the converter is so low that it does not
    require a heatsink for operation. Since a heatsink is not
    required, the
    PowerQor converter does not need a metal base-
    plate or potting material to help conduct the dissipated energy
    to the heatsink. The
    PowerQor converter can thus be built more
    simply and reliably using high yield surface mount techniques
    on a PCB substrate.
    The
    PowerQor series of half-brick and quarter-brick converters
    uses the industry standard footprint and pin-out configuration.
    CONTROL FEATURES
    REMOTE ON/OFF (Pin 2): The ON/OFF input, Pin 2, per-
    mits the user to control when the converter is
    on or off. This
    input is referenced to the return terminal of the input bus,
    Vin(-). There are two versions of the converter that differ by the
    sense of the logic used for the ON/OFF input.
    In the positive logic version, the ON/OFF input is active high
    (meaning that a high turns the converter
    on). In the negative
    logic version, the ON/OFF signal is active low (meaning that a
    low turns the converter
    on). Figure A details five possible cir-
    cuits for driving the ON/OFF pin. Figure B is a detailed look of
    the internal ON/OFF circuitry.
    REMOTE SENSE(+) (Pins 8 and 6): The SENSE(+) inputs
    correct for voltage drops along the conductors that connect the
    converter’s output pins to the load.
    Pin 8 should be connected to Vout(+) and Pin 6 should be con-
    nected to Vout(-) at the point on the board where regulation is
    desired. A remote connection at the load can adjust for a volt-
    age drop only as large as that specified in this datasheet, that
    is
    [Vout(+) - Vout(-)] [SENSE(+) - SENSE(-)] <
    Sense Range % x Vout
    Pins 8 and 6 must be connected for proper regulation of the out-
    put voltage. If these connections are not made, the converter
    will deliver an output voltage that is slightly lower than its spec-
    ified value.
    Product # PQ60033HMA30
    Phone 1-888-567-9596
    Doc.# 005-2HM633B Rev. D
    4/9/03
    Page 9
    Half
    Brick
    Technical Specification
    48Vin 3.3Vout 30A
    Open Collector Enable Circuit
    Figure A: Various circuits for driving the ON/OFF pin.
    Figure B: Internal ON/OFF pin circuitry
    Remote Enable Circuit
    Direct Logic Drive
    Negative Logic
    (Permanently Enabled)
    Positive Logic
    (Permanently Enabled)
    ON/OFF
    Vin(_
    )
    ON/OFF
    Vin(_
    )
    ON/OFF
    5V
    TTL/
    CMOS
    Vin(_
    )
    ON/OFF
    Vin(_)
    Vin(_
    )
    TTL
    5V
    50k
    274k
    Vin(+)
    ON/OFF
    Vin(_)
    50k
    100pF
    相關PDF資料
    PDF描述
    PQ60033HMA30NNF 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
    PQ60033HMA30NNS 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
    PQ48033HMA30NYS 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
    PQ48033HMA30NRS 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
    PQ60033HMA30NYF 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
    相關代理商/技術參數
    參數描述
    PQ48033HNA30NNS 制造商:SynQor 功能描述:
    PQ48033HTA38 制造商:SYNQOR 制造商全稱:SYNQOR 功能描述:Half-brick DC/DC Converter
    PQ48033HTA38NKF 制造商:SYNQOR 制造商全稱:SYNQOR 功能描述:Half-brick DC/DC Converter
    PQ48033HTA38NKS 制造商:SYNQOR 制造商全稱:SYNQOR 功能描述:Half-brick DC/DC Converter
    PQ48033HTA38NNF 制造商:SYNQOR 制造商全稱:SYNQOR 功能描述:Half-brick DC/DC Converter