
Ericsson Internal
PRODUCT SPECIFICATION
4 (10)
Prepared (also subject responsible if other)
No.
ECHWANG
2/1301-BMR 653 Uen
Approved
Checked
Date
Rev
Reference
SEC/D (Julia You)
EXUEFYA
2008-7-21
D
12 V/25 A Typical Characteristics
PKM 4204B PI
Output Current Derating, open frame
Thermal Resistance, open frame
0
5
10
15
20
25
0
20
40
60
80
100 [°C]
[A]
3.0 m/s
2.5 m/s
2.0 m/s
1.5 m/s
1.0 m/s
0.5 m/s
Nat. Conv.
0
2
4
6
8
10
0.0
0.5
1.0
1.5
2.0
2.5
3.0 [m/s]
[°C/W]
Available load current vs. ambient air temperature and airflow at
VI = 53 V. See Thermal Consideration section.
Thermal resistance vs. airspeed measured at the converter.
Tested in wind tunnel with airflow and test conditions as per
the Thermal consideration section.
Output Current Derating, base plate option
Thermal Resistance, base plate option
0
5
10
15
20
25
0
20
40
60
80
100 [°C]
[A]
3.0 m/s
2.5 m/s
2.0 m/s
1.5 m/s
1.0 m/s
Nat. Conv.
0
2
4
6
8
10
0.0
0.5
1.0
1.5
2.0
2.5
3.0 [m/s]
[°C/W]
Available load current vs. ambient air temperature and airflow at
VI = 53 V. See Thermal Consideration section.
Thermal resistance vs. airspeed measured at the converter.
Tested in wind tunnel with airflow and test conditions as per
the Thermal consideration section.
Output Current Derating, base plate option with heat sink*
Thermal Resistance, base plate option with heat sink*
0
5
10
15
20
25
0
20
40
60
80
100 [°C]
[A]
3.0 m/s
2.5 m/s
2.0 m/s
1.5 m/s
1.0 m/s
Nat. Conv.
0
2
4
6
8
10
0.0
0.5
1.0
1.5
2.0
2.5
3.0 [m/s]
[°C/W]
Available load current vs. ambient air temperature and airflow at
VI = 53 V. See Thermal Consideration section.
Thermal resistance vs. airspeed measured at the converter.
Tested in wind tunnel with airflow and test conditions as per
the Thermal consideration section.
*
) Heat sink: finned aluminium, height: 0.23”; Thermal pad: thermal conductivity: 6W/mK, thickness: 0.25mm; Mounting: two M3 screws, torque: 0.44Nm
NOTE: the product is not mechanically tested with heat sink
E
PKM4000B PI
Intermediate Bus Converters, Input 36-75 V, 33A/380W
EN/LZT 146 305 R5A July 2008
Ericsson Power Modules AB
Technical Specification
7