
Applications
I
Access / edge aggregation
I
MSPP
I
ADM
I
Mapper mode: packets are
mapped between Ethernet and
SDH/SONET interfaces
I
Packet mode: packets from the
SPI-3 interface are forwarded to
SDH/SONET and Ethernet inter-
faces, and vice versa
64 low-order paths into any virtual
concatenation group
I
Supports up to 336 VT1.5 or
252 TU12 low-order paths
I
Provides following mapping
schemes:
- AU-4 / VC-4 / TUG-3
- AU-3 / VC-3 or STS-1 / STS-SPE
I
External buffer for up to 48 ms
differential delay compensation
I
Different VCG group types are
defined:
- N
×
VC-12, N
×
VC-11,
N
×
VT1.5 SPE, N
×
VT2 SPE
(N
≤
64)
P
R O D U C T
B
R I E F
N e v e r s t o p t h i n k i n g .
M e t r o M a p p e r 6 2 2
P E B 1 7 6 0
Mapper/Framer for STM-4/STS-12
and STM-1/STS-3
The MetroMapper 622 is a mapper/framer capa-
ble of mapping datacom traffic into SONET/SDH
transport payloads. On the line side, the
MetroMapper 622 supports protected
STS-12/STM-4 and STS-3/STM-1 interfaces. On
the client side, up to sixteen Ethernet interfaces
(10/100 Mbps), two 1 GE and one OIF SPI-3 inter-
face with up to 64 logical channels are provided.
The Ethernet traffic or the packets coming from
the SPI-3 interface are encapsulated by either the
GFP-F, LAPS (X.85/.86) or PPP mapping scheme.
Low-order and high-order virtual concatenation
(VCAT) with Link Capacity Adjustment Schemes
(LCAS) for up to 64 virtual concatenated channels
is supported. MetroMapper 622 provides Ether-
net IEEE802.1q VLAN operations and enables
Ethernet over MPLS.
Features
Framer
I
Multi-Rate SONET/SDH framer
with STS/AU and VT/TU pointer
processing capabilities
I
Processes a single
STS-12/STM-4 or a quad
STS-3/STM-1
I
Supports 1+1 line protection
I
Payload Pointer interpretation and
generation
I
Fully SONET/SDH compliant
I
Provides full performance moni-
toring for high- and low-order
paths
I
Provides high-order and low-order
virtual concatenation according to
ITU-T G.707
I
Supports up to 64 virtual concate-
nated groups (VCG)
I
Flexible concatenation of up to
12 high-order paths and up to
- N
×
VC-3, N
×
STS1 SPE
(N
≤
12)
- N
×
VC-4, N
×
STS3c SPE
(N
≤
4)
I
Provides flexible mapping of any
VCG into any VC-4/STS-3
I
Fully integrated support for the
Link Capacity Adjustment Scheme
(LCAS) protocol according to
ITU-T G. 7042
I
Provides hitless increase and
decrease of multiple members
VCG
SPI-3 Interface
I
64 logical channels each of them
running in 32-bit mode
I
Packet mode with variable block
length