
Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
SMT Data Line EMI Filters–PDLF
Document 491-1
Revised 10/30/08
Current
Inductance
Part
max2
min3
DCR max
number1
Lines
(mA)
(H)
(mOhms)
PDLF4000L_
4
100
5
250
PDLF4500L_
4
500
5
200
PDLF3000L_
3
100
5
250
PDLF3500L_
3
500
5
200
PDLF2000L_
2
100
5
250
PDLF2500L_
2
500
5
200
1. When ordering, please specify packaging code:
PDLF4500L
C
C =7
″ machine ready reel. EIA-481 embossed plastic tape (500 parts
per full reel).
D =13
″ machine ready reel. EIA-481 embossed plastic tape
(2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a
leader and trailer added ($25 charge), use code letter D instead.
2. Current rating is for each line.
3. Inductance is per winding, tested at 1 MHz.
4. Operating temperature range -40°C to +85°C.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
30
20
10
0
-10
0.1
1
10
100
1000
Frequency (MHz)
Atten
uation
(dB)
Common Mode
Differential Mode
* Measured on HP 8753D network analyzer. Ref: 50 Ohms.
Typical Response*
Designer’s Kit D303 contains four each of all values plus DLF and
CCDLF filters
Core material Ferrite
Terminations RoHS compliant Tin-silver-copper over tin over
nickel over phos bronze terminations. Other terminations available at
additional cost.
Weight 183 – 201 mg
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 500/7
″reel; 2000/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth
PCB washing Only pure water or alcohol recommended
Available in 4, 3 and 2-line versions
See our CCDLF series for 10 and 8-line EMI filters
Exceptional common mode noise attenuation from 15 MHz
to 300 MHz; passes signal line data below 300 MHz with
minimal attenuation
DC current capacity of 500 or 100 mA.
Excellent electrical isolation (300 Vrms)