參數(shù)資料
型號: P80C32-2
廠商: INTEL CORP
元件分類: 微控制器/微處理器
英文描述: CHMOS SINGLE-CHIP 8-BIT MICROCONTROLLER
中文描述: 8-BIT, 12 MHz, MICROCONTROLLER, PDIP40
封裝: PLASTIC, DIP-40
文件頁數(shù): 21/23頁
文件大小: 319K
代理商: P80C32-2
8XC52/54/58
ROM and EPROM Lock System
The program lock system, when programmed, pro-
tects the onboard program against software piracy.
The 80C5X has a one-level program lock system
and a 64-byte encryption table. See line 2 of Table
5. If program protection is desired. the user submits
the encryption table with their code. and both the
lock-bit and encryption array are programmed by the
factory. The encryption array is not available without
the lock bit. For the lock bit to be programmed, the
user must submit an encryption table.
The 87C5X has a 3-level program lock system and a
64-byte encryption array. Since this is an EPROM
device, all locations are user-programmable. See
Table 5.
Encryption Array
Within the EPROM array are 64 bytes of Encryption
Array that are initially unprogrammed (all 1’s). Every
time that a byte is addressed during a verify, 6 ad-
dress lines are used to select a byte of the Encryp-
tion Array. This byte is then exclusive-NOR’ed
(XNOR) with the code byte, creating an Encryption
Verify byte. The algorithm, with the array in the un-
programmed state (all 1’s), will return the code in its
original, unmodified form. For programming the En-
cryption Array, refer to Table 4 (Programming the
EPROM).
When using the encryption array, one important fac-
tor needs to be considered. If a code byte has the
value 0FFH, verifying the byte will produce the en-
cryption byte value. If a large block (
l
64 bytes) of
code is left unprogrammed, a verification routine will
display the contents of the encryption array. For this
reason all unused code bytes should be pro-
grammed with some value other than 0FFH, and not
all of them the same value. This will ensure maxi-
mum program protection.
Program Lock Bits
The 87C5X has 3 programmable lock bits that when
programmed according to Table 5 will provide differ-
ent levels of protection for the on-chip code and
data.
Erasing the EPROM also erases the encryption ar-
ray and the program lock bits, returning the part to
full functionality.
Reading the Signature Bytes
The 8XC5X has 3 signature bytes in locations 30H,
31H, and 60H. To read these bytes follow the proce-
dure for EPROM verify, but activate the control lines
provided in Table 4 for Read Signature Byte.
Location
Device
Contents
30H
All
89H
31H
All
58H
60H
80C52
12H
87C52
52H
80C54
14H
87C54
54H
80C58
18H
87C58
58H
Erasure Characteristics
(Windowed Packages Only)
Erasure of the EPROM begins to occur when the
chip is exposed to light with wavelength shorter than
approximately 4,000 Angstroms. Since sunlight and
fluorescent lighting have wavelengths in this range,
exposure to these light sources over an extended
time (about 1 week in sunlight, or 3 years in room-
level fluorescent lighting) could cause inadvertent
erasure. If an application subjects the device to this
type of exposure, it is suggested that an opaque la-
bel be placed over the window.
The recommended erasure procedure is exposure
to ultraviolet light (at 2537 Angstroms) to an integrat-
ed dose of at least 15 W-sec/cm
2
. Exposing the
EPROM to an ultraviolet lamp of 12,000
m
W/cm
2
rating for 30 minutes, at a distance of about 1 inch,
should be sufficient.
Erasure leaves all the EPROM Cells in a 1’s state.
21
相關PDF資料
PDF描述
P80C552EHA Single-chip 8-bit microcontroller
P83C552EFA Single-chip 8-bit microcontroller
P80C552IFB Single-chip 8-bit microcontroller
P83C552IFB Single-chip 8-bit microcontroller
P80C552KBA Single-chip 8-bit microcontroller
相關代理商/技術參數(shù)
參數(shù)描述
P80C32-20 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
P80C3224 制造商:Intel 功能描述:
P80C32-24 制造商:Intel 功能描述:8-BIT, 24 MHz, MICROCONTROLLER, PDIP40
P80C3224 S F88 制造商:Intel 功能描述:MCU 8-bit MCS51 8051 CISC ROMLess 5V 40-Pin PDIP 制造商:Intel 功能描述:MCU 8-bit MCS51 80C51 CISC ROMLess 5V 40-Pin PDIP
P80C3224 S F88 制造商:Intel 功能描述:MCU 8-bit MCS51 8051 CISC ROMLess 5V 40-Pin PDIP