- 您現在的位置：買賣IC網 > PDF目錄363778 > OPA541AP RxxPxx Series - Econoline Unregulated DC-DC Converters; Input Voltage (Vdc): 12V; Output Voltage (Vdc): 05V; Power: 1W; EN 60950 certified, rated for 250VAC; UL-60950-1 / CSA C22.2 certified; 5.2kVDC Isolation for 1 Minute; Optional Continuous Short Circuit Protected; 2 Chamber Transformer System; UL94V-0 Package Material; Efficiency to 80% PDF資料下載
參數資料
| 型號： | OPA541AP |
| 元件分類： | DC/DC變換器 |
| 英文描述： | RxxPxx Series - Econoline Unregulated DC-DC Converters; Input Voltage (Vdc): 12V; Output Voltage (Vdc): 05V; Power: 1W; EN 60950 certified, rated for 250VAC; UL-60950-1 / CSA C22.2 certified; 5.2kVDC Isolation for 1 Minute; Optional Continuous Short Circuit Protected; 2 Chamber Transformer System; UL94V-0 Package Material; Efficiency to 80% |
| 中文描述： | 高功率單片運算放大器 |
| 文件頁數： | 7/8頁 |
| 文件大小： | 104K |
| 代理商： | OPA541AP |
7
OPA541
FIGURE 1. Safe Operating Area.
Short circuit protection requires evaluation of SOA. When
the amplifier output is shorted to ground, the full power
supply voltage is impressed across the conducting output
transistor. The current limit must be set to a value which is
safe for the power supply voltage used. For instance, with V
S
±
35V, a short to ground would force 35V across the conduc-
ting power transistor. A current limit of 1.8A would be safe.
Reactive, or EMF-generating, loads such as DC motors can
present difficult SOA requirements. With a purely reactive
load, output voltage and load current are 90
°
out of phase.
Thus, peak output current occurs when the output voltage is
zero and the voltage across the conducting transistor is equal
to the full power supply voltage. See Burr-Brown Applica-
tion Bulletin AB-039 for further information on evaluating
SOA.
REPLACING HYBRID POWER AMPLIFIERS
The OPA541 can be used in applications currently using
various hybrid power amplifiers, including the OPA501,
OPA511, OPA512, and 3573. Of course, the application
must be evaluated to assure that the output capability and
other performance attributes of the OPA541 meet the neces-
sary requirement. These hybrid power amplifiers use two
current limit resistors to independently set the positive and
negative current limit value. Since the OPA541 uses only
one current limit resistor to set both the positive and negative
current limit, only one resistor (see Figure 4) need be
installed. If installed, the resistor connected to pin 2 (TO-3
package) is superfluous, but it does no harm.
Because one resistor carries the current previously carried
by two, the resistor may require a higher power rating.
Minor adjustments may be required in the resistor value to
achieve the same current limit value. Often, however, the
change in current limit value when changing models is small
compared to its variation over temperature. Many applica-
tions can use the same current limit resistor.
FIGURE 3. Isolating Capacitive Loads.
APPLICATIONS CIRCUITS
10
1
0.1
1
10
100
|V – V | (V)
SAFE OPERATING AREA
|
O
T = +25°C
T = +85°C
AP, AM
BM, SM
T
= +125°C
“M” Package only
FIGURE 2. Clamping Output for EMF-Generating Loads.
10μF
OPA541
0.1μF
0.1μF
10μF
–V
S
D
2
D
1
L
Inductive or
EMF-Generating
Load
+V
S
D – D : IN4003
OPA541
0.1
100k
R
2
10k
R
1
V
IN
20pF
L
OPA541
0.1
Slave
A = –R /R
= –10
1
Master
10k
20pF
FIGURE 4. Replacing OPA501 with OPA541.
OPA541
1
2
8
R
CL
Not Required
OPA501
1
2
8
R
CL
R
CL
+
–
Pin 2 is “open” on OPA541.
相關PDF資料 |
PDF描述 |
|---|---|
| OPA541BM | RxxPxx Series - Econoline Unregulated DC-DC Converters; Input Voltage (Vdc): 12V; Output Voltage (Vdc): 05V; Power: 1W; EN 60950 certified, rated for 250VAC; UL-60950-1 / CSA C22.2 certified; 5.2kVDC Isolation for 1 Minute; Optional Continuous Short Circuit Protected; 2 Chamber Transformer System; UL94V-0 Package Material; Efficiency to 80% |
| OPA541SM | RxxPxx Series - Econoline Unregulated DC-DC Converters; Input Voltage (Vdc): 12V; Output Voltage (Vdc): 09V; Power: 1W; EN 60950 certified, rated for 250VAC; UL-60950-1 / CSA C22.2 certified; 5.2kVDC Isolation for 1 Minute; Optional Continuous Short Circuit Protected; 2 Chamber Transformer System; UL94V-0 Package Material; Efficiency to 80% |
| OPA541 | 1K SEEPROM Addressable Memory Device, -40C to +85C, 8-MSOP, T/R |
| OPA544 | High-Voltage. High-Current Operational Amplifier |
| OPA547 | High-Voltage. High-Current Op Amp. Excellent Output Swing |
相關代理商/技術參數 |
參數描述 |
|---|---|
| OPA541AP | 制造商:Texas Instruments 功能描述:OP AMP HIGH POWER TO-220-11 541 |
| OPA541AP | 制造商:Texas Instruments 功能描述:IC OP-AMP 1.6MHZ 10V/s TO-220-11 |
| OPA541APG3 | 功能描述:運算放大器 - 運放 Hi-Power Monolithic Op Amp RoHS:否 制造商:STMicroelectronics 通道數量:4 共模抑制比（最小值）:63 dB 輸入補償電壓:1 mV 輸入偏流（最大值）:10 pA 工作電源電壓:2.7 V to 5.5 V 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 轉換速度:0.89 V/us 關閉:No 輸出電流:55 mA 最大工作溫度:+ 125 C 封裝:Reel |
| OPA541BM | 功能描述:運算放大器 - 運放 Hi-Power Monolithic Op Amp RoHS:否 制造商:STMicroelectronics 通道數量:4 共模抑制比（最小值）:63 dB 輸入補償電壓:1 mV 輸入偏流（最大值）:10 pA 工作電源電壓:2.7 V to 5.5 V 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 轉換速度:0.89 V/us 關閉:No 輸出電流:55 mA 最大工作溫度:+ 125 C 封裝:Reel |
| OPA541BM | 制造商:Texas Instruments 功能描述:IC, OP-AMP, 1.6MHZ, 10V/ us, TO-3-8 |
發布緊急采購，3分鐘左右您將得到回復。