OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747      FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue H 11/2011
Page 1 of 7
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
High Reliability Hallogic Hall-Effect Sensors
OMH090 OMH3019, OMH3020, OMH3040, OMH3075,
OMH3131 (B, S versions)
Features:
"     Designed for non-contact switching operations
"     Operates over a broad range of supply voltages
"     Excellent temperature stability operates in harsh environments
"     Suitable for military and space applications
"     Processing patterned after class B or S of MIL-STD-883
"     Through Hole 0.40 [10.16 mm] lead length minimum
"     Surface Mount 0.125 [3.18 mm] lead length
"     ESD Rating of Class 3B per MIL-STD-883G, M3015.7, HB model.
Description:
These Hall-effect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear
amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic?silicon chip. Included on-chip is a band-
gap voltage regulator that allows operation with a wide range of supply voltages. These devices feature logic level
output and provide up to 21 mA of sink current. This allows direct driving of more than 7 TTL loads or any
standard logic family using power supplies ranging from 4.5 to 24 volts. Output amplitude is constant at switching
frequencies from DC to over 200 kHz.
The Uni-Polar turns on with a (logic level 0) after a sufficient magnetic field from the south pole of a magnet
approaches the symbolized face of the device (operating point) and turns off (logic level 1) after the magnetic
field reaches a minimum value. The Bi-Polar device turns on (logic level 0) in the presence of a magnetic south
pole and turns off (logic level 1) when subjected to a magnetic north pole. Both magnetic poles are necessary for
operation for Bi-Polar devices. This feature makes these sensors ideal for applications in non-contact switching
operations, brushless DC motors and for use with multiple pole magnets.
B and S devices are processed to OPTEKs military screening program patterned after MIL-STD-883. This
product has passed Radiation Hardness testing up to 350 Krad (si) per MIL-STD-883 method 1019.6 and up to
150 Krad (si) for ELDRS.
Contact your local representative or OPTEK for more information.
Ceramic Package
Applications:
" Non-contact switching operations
" Brushless DC motors
" Multiple pole magnets
" Non-contact reflective object sensor
" Assembly line automation
" Machine automation
" Machine safety
" End of travel sensor
" Door sensor
DIMENSIONS ARE IN:
INCHES
[MILLIMETERS]
Lead finish = Solder Dipped (Sn 63/37)
0.010?.005
[0.25?.12]
Pin #    Description
1
V
CC
2
Ground
3
Output
* Add capacitor for stable operation