
NT91315XL Series
PRELIMINARY
Microcontroller for Monitor
1
Features
n
Tone/Pulse switchable
n
32-digit redial memory
n
32-digit save memory (DL version)
n
3 emergency memory banks (16 digits each)
n
10 indirect memory banks (16 digits each)
n
Flash, Pause, P
→
T can be saved as a digit in
memory
n
Chain dialing allowed
n
None or (0) or (0, 9) or (0, 168) or all digits dialing
inhibition (diode option) for PABX system or long
distance dialing lock out
n
Pause time 2.2/3.6 sec selectable (diode option)
n
3 pulse dialing number systems N/N+1/10-N (diode
option)
n
Dialing
selectable/dialing rate 10pps & 20pps selectable, M/B
ratio 1/2 (diode option)
n
Hands-Free control function with debouncing (BL, CL
& DL version)
n
Hold function with debouncing (CL & DL version)
n
Key-tone output for dialing access (DL version)
n
One-key redial (DL version)
n
Flash time 600ms, 300ms, 100ms (DL version)
n
Power-up reset circuit provided
n
Key release debouncing
n
32-step synthetic tone output for low DTMF output
harmonic distortion
n
16/18/20/22-pin packages
rate
10pps,
M/B
ratio
2/3
&
1/2
General Description
The NT91315XL series are single-chip silicon gate
CMOS integrated circuits with on-chip oscillators to be
used with a 3.58 MHz crystal or ceramic resonator. They
provide dialing pulse (DP) or dual tone multi-frequency
(DTMF) dialing. A 24-key (5x5-1) matrix keyboard is
used for either DP or DTMF mode. In on-chip RAM, up to
32 digits can be saved for both redial and save functions,
and up to 16 digits can be saved for 3 direct emergency
and 10 indirect dialing memory banks. In DTMF mode, a
small minimum tone duration and minimum inter-tone
pause allows for rapid dialing. Maximum tone duration
depends on the key depression time in manual dialing.
Pin Configurations
a. NT91315AL
b. NT91315BL
c. NT91315CL
d. NT91315DL