- 您現在的位置：買賣IC網 > PDF目錄363667 > NSPG500S (Electronic Theatre Controls, Inc.) NICHIA GREEN LED PDF資料下載
參數資料
| 型號： | NSPG500S |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | NICHIA GREEN LED |
| 中文描述： | 日亞化學綠色發光二極管 |
| 文件頁數： | 6/15頁 |
| 文件大?。?/td> | 288K |
| 代理商： | NSPG500S |
-5-
Nichia STSE-CG2139B
<Cat.No.031112>
(4) Soldering Conditions
· Nichia LED leadframes are comprised of a silver plated copper alloy. This substance has a low
thermal coefficient (easily conducts heat). Careful attention should be paid during soldering.
· Solder the LED no closer than 3mm from the base of the epoxy bulb. Soldering beyond the base
of the tie bar is recommended.
· Recommended soldering conditions
Dip Soldering
Pre-Heat
Pre-Heat Time
Solder Bath
Temperature
Dipping Time
Dipping Position
base of the epoxy bulb.
· Do not apply any stress to the lead particularly when heated.
· The LEDs must not be repositioned after soldering.
· After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or vibration until
the LEDs return to room temperature.
· Direct soldering onto a PC board should be avoided. Mechanical stress to the resin may be caused
from warping of the PC board or from the clinching and cutting of the leadframes. When it is
absolutely necessary, the LEDs may be mounted in this fashion but the User will assume responsibility
for any problems. Direct soldering should only be done after testing has confirmed that no damage,
such as wire bond failure or resin deterioration, will occur. Nichia’s LEDs should not be soldered
directly to double sided PC boards because the heat will deteriorate the epoxy resin.
· When it is necessary to clamp the LEDs to prevent soldering failure, it is important to minimize
the mechanical stress on the LEDs.
· Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures may
cause failure of the LEDs.
(5) Heat Generation
· Thermal design of the end product is of paramount importance. Please consider the heat generation
of the LED when making the system design. The coefficient of temperature increase per input
electric power is affected by the thermal resistance of the circuit board and density of LED
placement on the board, as well as other components. It is necessary to avoid intense heat generation
and operate within the maximum ratings given in this specification.
· The operating current should be decided after considering the ambient maximum temperature of LEDs.
(6) Cleaning
· It is recommended that isopropyl alcohol be used as a solvent for cleaning the LEDs. When using
other solvents, it should be confirmed beforehand whether the solvents will dissolve the resin or not.
Freon solvents should not be used to clean the LEDs because of worldwide regulations.
· Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of ultrasonic
cleaning on the LEDs depends on factors such as ultrasonic power and the assembled condition.
Before cleaning, a pre-test should be done to confirm whether any damage to the LEDs will occur.
Soldering
350°C Max.
3 seconds Max.
No closer than 3 mm from the
base of the epoxy bulb.
120°C Max.
60 seconds Max.
260°C Max.
10 seconds Max.
No lower than 3 mm from the
Temperature
Soldering Time
Position
相關PDF資料 |
PDF描述 |
|---|---|
| NSPG510S | NICHIA GREEN LED |
| NSPG520S | LED |
| NSPG546BS | GREEN LED |
| NSPG636AS | SPECIFICATIONS FOR NICHIA GREEN LED |
| NSPGF50S | NICHIA GREEN LED |
相關代理商/技術參數 |
參數描述 |
|---|---|
| NSPG500S | 制造商:MARL International Limited 功能描述:LED 5MM 15DEG GREEN |
| NSPG510AS | 制造商:Nichia CORPORATION 功能描述:LED, Radial,5mm,Green,10000mcd(20mA) 制造商:Nichia CORPORATION 功能描述:Green LED,5mm,6000-16800mcd,30deg 制造商:Nichia 功能描述:LED,NSPG510AS 制造商:Nichia CORPORATION 功能描述:LED,NSPG510AS |
| NSPG510S | 制造商:MARL International Limited 功能描述:5mm Green Water Clear LED with an approx viewing angle of 60 degrees 制造商:Nichia CORPORATION 功能描述:5mm round bluish green LED,NSPG510S 制造商:Nichia 功能描述:LED, NSPG510S 制造商:Nichia CORPORATION 功能描述:LED, NSPG510S |
| NSPG513 | 制造商:NICHIA 制造商全稱:NICHIA CORPORATION 功能描述:GREEN LED |
| NSPG513A | 制造商:NICHIA 制造商全稱:NICHIA CORPORATION 功能描述:GREEN LED |
發布緊急采購，3分鐘左右您將得到回復。