
NJW1144
- 12-
I
I
2
C CONTROL COMMAND DESCRIPTION
G
MASTER VOLUME CONTROL
BIT
Select
Address
D7
D6
D5
D4
D3
D2
D1
D0
00H
VOL
The attenuator is consisted of both the Volume1 and Volume2. The total attenuation level is summing of each
attenuation level of the Volume1 and Volume2. The attenuation for both the Volume1 and Volume2 are always
synchronized to have the same attenuation levels for each other, and are not controllable independently for each
other.
”VOL”: Sets the total attenuation level for the both Ach and Bch (up to 84dB, 0.33dB/step)
G
CHANNEL BALANCE AND SURROUND MODE CONTROL
BIT
Select
Address
D7
D6
D5
D4
D3
D2
D1
D0
01H
CHS
BAL
SR1
SR0
N
Channel Balance Control
To control the balance between Ach and Bch, the both commands “CHS” and “BAL” should be set. For example,
to move a sound image to Ach-side, Bch should be attenuated with no attenuation on Ach. The command “CHS”
defines the channel should be attenuate, and the command “BAL” defines the attenuation level itself. The
attenuation for the balance control is consisted of the both Volume1 and Volume2, has the same structure with
Master Volume Control described above.
”CHS”: Defines the channel should be attenuated
The channel
should be attenuated
(D7)
CHS
Bch
0
Ach
1
”BAL”: Defines the attenuation level for the specified channel with command “CHS” (up to 30dB, 1dB/Step)
N
Surround Mode Control
”SR1”, “SR0”: Surround Mode Switch
SR1
(D1)
(D0)
Surround Mode
SR0
Surround OFF (Bypass)
0
0
NJRC Original Simulated Surround
SRS 3D-Stereo – High Mode
SRS 3D-Stereo – Low Mode
0
1
1
1
0
1