- 您現在的位置：買賣IC網 > PDF目錄378018 > MSM82C84A-2JS (OKI SEMICONDUCTOR CO., LTD.) CLOCK GENERATOR AND DRIVER PDF資料下載
參數資料
| 型號： | MSM82C84A-2JS |
| 廠商： | OKI SEMICONDUCTOR CO., LTD. |
| 英文描述： | CLOCK GENERATOR AND DRIVER |
| 中文描述： | 時鐘發生器和驅動程序 |
| 文件頁數： | 6/18頁 |
| 文件大?。?/td> | 164K |
| 代理商： | MSM82C84A-2JS |
第1頁第2頁第3頁第4頁第5頁當前第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁
6/18
Semiconductor
MSM82C84A-2RS/GS/JS
PIN DESCRIPTION
CSYNC
Name
Clock
Synchronization
Single
Input
Pin Symbol
Input/Output
Function
AEN
1
AEN
2
Address Enable
Signals
Input
RDY
1
RDY
2
Bus Ready
Signals
Input
READY
Ready Output
Output
CLK
Clock Output
Output
RES
Reset in
Input
Synchronizing signal for output of in-phase CLK signals when more
than one MSM82C84A-2 is used.
The internal counter is reset when this signal is at high level, and a
high level CLK output is generated. The internal counter is
subsequently activated and a 33% duty CLK output is generated when
this signal is switched to low level.
When this signal is used, external synchronization of EFI is necessary.
When the internal oscillator is used, it is necessary for this pin to be
kept to be low level.
This peripheral circuit clock signal is output in a 50% duty cycle at
a frequency half that of the clock signal.
The AEN
signal enables RDY
, and the AEN
signal RDY
.
The respective RDY inputs are activated when the level applied to
these pins is low.
Although two separate inputs are used in multi-master systems, only
the
AEN
which enables the RDY input to be used is to be switched to
low level in the case of not using multi-master systems.
Completion of data bus reading and writing by the device connected
to the system data bus is indicated when one of these signals is
switched to high level.
The relevant RDY input is enables only when the corresponding
AEN
is at low level.
This signal is obtained by synchronizing the bus ready signal with
CLK.
This signal is output after guaranteeing the hold time for the
CPU in phase with the RDY input.
This signal is the clock used by the CPU and peripheral devices
connected to the CPU system data bus. The output waveform is
generated in a 33% duty cycle at a frequency 1/3 the oscillating
frequency of the crystal oscillator connected to the X
1
and X
2
pins,
or at a frequency 1/3 the EFI input frequency.
This low-level active input is used to generate a CPU reset signal.
Since a Schmitt trigger is included in the input circuit for this signal,
"power on resetting" can be achieved by connection of a simple RC
circuit.
This signal is obtained by CLK synchronization of the input signal
applied to
RES
and is output in opposite phase to the
RES
input.
This signal is applied to the CPU as the system reset signal.
This signal selects the fundamental signal for generation of the CLK
signal. The CLK is generated from the crystal oscillator output when
this signal is at low level, and from the EFI input signal when at high
level.
The signal applied to this input pin generaters the CLK signal when
F/
C
is at high level. The frequency of the input signal needs to be
three times greater than the desired CLK frequency.
Crystal oscillator connections.
The crystal oscillator frequency needs to be three times greater than
the desired CLK frequency.
PCLK
Output
RESET
Reset Output
Output
F/C
Clock Select
Signal
Input
OSC
Crystal
Resonator
Output
Output
EFI
External Clock
Signal
Input
Peripheral Clock
Output
X
1
, X
2
Crystal Oscillator
Connecting Pins
Input
Crystal oscillator output. This output frequency is the same as the
oscillating frequency of the oscillator connected to the X
and X
pins. As long as a Xtal oscillator is connected to the X
and X
pins,
this output signal can be obtained independently even if F/
C
is set to
high level to enable the EFI input to be used CLK generation purpose.
相關PDF資料 |
PDF描述 |
|---|---|
| MSM82C84A-2RS | CLOCK GENERATOR AND DRIVER |
| MSM82C84A-2GS | CLOCK GENERATOR AND DRIVER |
| MSM82C88-2GS | WIRE MOULD 1/2 X 6 2700 |
| MSM82C88-2JS | BUS CONTROLLER |
| MSM82C88-2RS | BUS CONTROLLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MSM82C84A-2RS | 制造商:ROHM Semiconductor 功能描述:CLOCK GENERATOR AND DRIVER 制造商:ROHM Semiconductor 功能描述:Clock generator drive |
| MSM82C88-2GS | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:BUS CONTROLLER |
| MSM82C88-2JS | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:BUS CONTROLLER |
| MSM82C88-2RS | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:BUS CONTROLLER |
| MSM83C154S | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:CMOS 8-bit Microcontroller |
發布緊急采購，3分鐘左右您將得到回復。