參數資料
型號: MSM64162D-XXGS-BK-F
廠商: OKI ELECTRIC INDUSTRY CO LTD
元件分類: 微控制器/微處理器
英文描述: 4-BIT, MROM, MICROCONTROLLER, PQFP80
封裝: 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件頁數: 27/37頁
文件大?。?/td> 320K
代理商: MSM64162D-XXGS-BK-F
33/37
Semiconductor
MSM64162D
Clock generation circuit (CLKG)
The clock generation circuit (CLKG) in the MSM64162D contains a 32.768 kHz crystal oscillation
circuit. This circuit generates the system clock (CLK) and the time base clock (32.768 kHz).
The system clock drives the CPU while the time base clock drives the time base counter and the
buzzer driver.
The system clock frequency is 32.768 kHz, which is the output of the crystal oscillation circuit.
Time base counter (TBC)
The MSM64162D has a built-in time base counter (TBC) that generates clocks to be supplied to
internal peripheral circuits. The time base counter is composed of 15 binary counters. The count
clock of the time base is driven by the oscillation clock (32.768 kHz) of the crystal oscillation
circuit. The output of the time base counter is used for the buzzer driver, the system reset circuit,
the watchdog timer, the time base interrupt, the sampling clocks of each port, and the capture
circuit.
I/O port
Input-output ports (P2, P3) (8 bits)
: Pull-up (pull-down) resistor input or high-
impedance input, CMOS output or NMOS
open drain output: these can be specified for
each bit; external 0 interrupt
Input port (P0) (4 bits)
: Pull-up (pull-down) resistor input or high-
impedance input; external 1 interrupt
Output port (P1) (4 bits)
: CMOS output or NMOS open drain output
Interrupt (INTC)
The MSM64162D has 9 interrupt sources (9 vector addresses), of which two are external
interrupts from ports and seven are internal interrupts.
Of the nine interrupt sources, only the watchdog interrupt cannot be disabled (non-maskable
interrupt). The other eight interrupts are controlled by the master interrupt enable flag (MI) and
the interrupt enable registers (IE0, IE1 and IE2). When an interrupt condition is met, the CPU
branches to a vector address corresponding to the interrupt source.
Battery check circuit (BC)
The battery check circuit (BC) detects the level of the supply voltage by comparing the voltage
generated by an external supply-voltage dividing resistor (RBLD) with the internal reference
voltage (Vrb).
相關PDF資料
PDF描述
MSM64167-XXXGS-K 4-BIT, MROM, MICROCONTROLLER, PQFP80
MSM64167E-XXXGA 4-BIT, MROM, 0.7 MHz, MICROCONTROLLER, PQFP80
MSM64167E-XXXTB 4-BIT, MROM, 0.7 MHz, MICROCONTROLLER, PQFP80
MSM64167E-XXX 4-BIT, MROM, 0.7 MHz, MICROCONTROLLER, UUC80
MSM64167E-XXXGA 4-BIT, MROM, 0.7 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
MSM64164C 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:4-Bit Microcontroller with Built-in RC Oscillation Type A/D Converter and LCD Driver
MSM64164C-384 制造商:Oki Semiconductor 功能描述:MCU
MSM64164C-576 制造商:Oki Semiconductor 功能描述:4-BIT MICROCONTROLLER
MSM64164C-704 制造商:Oki Semiconductor 功能描述:4-BIT MCU EOL211209
MSM64167E 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:4-Bit Microcontroller with Built-in Dual-Slope Type A/D Converter and LCD Driver