參數資料
型號: MQ80C52EXXX-16/883D
廠商: TEMIC SEMICONDUCTORS
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 16 MHz, MICROCONTROLLER, CQFP44
文件頁數: 104/109頁
文件大?。?/td> 10824K
代理商: MQ80C52EXXX-16/883D
806
32117D–AVR-01/12
AT32UC3C
The Transmitter can be operated by writing to the Transmitter Holding Register (RHR), when-
ever the Transmit Ready (TXRDY) bit in the Status Register (SR) is set. Successive values
written to THR should correspond to the samples from the left and right audio channels, or from
channels 0 to MR.NBCHAN in TDM mode, for the successive frames.
The Receive Ready and Transmit Ready bits can be polled by reading the Status Register.
The IISC processor load can be reduced by enabling interrupt-driven operation. The RXRDY
and/or TXRDY interrupt requests can be enabled by writing a one to the corresponding bit in the
Interrupt Enable Register (IER). The interrupt service routine associated to the IISC interrupt
request will then be executed whenever the Receive Ready or the Transmit Ready status bit is
set.
30.6.3
Master, Controller, and Slave Modes
In Master and Controller modes, the IISC provides the Master Clock, the Serial Clock and the
Word Select. IMCK, ISCK, and IWS pins are outputs.
In Controller mode, the IISC Receiver and Transmitter are disabled. Only the clocks are enabled
and used by an external receiver and/or transmitter.
In Slave mode, the IISC receives the Serial Clock and the Word Select from an external master.
ISCK and IWS pins are inputs.
The mode is selected by writing the MODE field of the Mode Register (MR). Since the MODE
field changes the direction of the IWS and ISCK pins, the Mode Register should only be written
when the IISC is stopped, in order to avoid unwanted glitches on the IWS and ISCK pins.
30.6.4
I
2S Reception and Transmission Sequence
As specified in the I2S protocol, data bits are left-adjusted in the Word Select time slot, with the
MSB transmitted first, starting one clock period after the transition on the Word Select line.
Figure 30-2. I
2S Reception and Transmission Sequence
Data bits are sent on the falling edge of the Serial Clock and sampled on the rising edge of the
Serial Clock. The Word Select line indicates the channel in transmission, a low level for the left
channel and a high level for the right channel.
The length of transmitted words can be chosen among 8, 16, 18, 20, 24, and 32 bits by writing
the MR.DATALENGTH field.
If the time slot allows for more data bits than written in the MR.DATALENGTH field, zeroes are
appended to the transmitted data word or extra received bits are discarded. If the time slot
allows for less data bits than written, the extra bits to be transmitted are not sent or the missing
bits are set to zero in the received data word.
Serial Clock ISCK
Word Select IWS
Data ISDI/ISDO
MSB
Left Channel
LSB
MSB
Right Channel
相關PDF資料
PDF描述
MR80C32-16/883 8-BIT, 16 MHz, MICROCONTROLLER, CQCC44
MC80C52TXXX-25SC 8-BIT, MROM, 25 MHz, MICROCONTROLLER, CDIP40
MC80C32-30SHXXX:D 8-BIT, 30 MHz, MICROCONTROLLER, CDIP40
MQ80C52CXXX-25:R 8-BIT, MROM, 25 MHz, MICROCONTROLLER, CQFP44
MD80C52TXXX-20P883D 8-BIT, MROM, 20 MHz, MICROCONTROLLER, CDIP40
相關代理商/技術參數
參數描述
MQ82370-20 制造商:Rochester Electronics LLC 功能描述:- Bulk
MQ8238020 制造商:Intel 功能描述:CONTROLLER: OTHER
MQ82380-20 制造商:Rochester Electronics LLC 功能描述:- Bulk
MQ82380-20/R 制造商:Rochester Electronics LLC 功能描述:
MQ82592 制造商:Rochester Electronics LLC 功能描述:- Bulk