
44
XMEGA C3 [DATASHEET]
8492F–AVR–07/2013
26.
ADC – 12-bit Analog to Digital Converter
26.1
Features
 One Analog to Digital Converter (ADC)
 12-bit resolution
 Up to 300 thousand samples per second
 Down to 2.3s conversion time with 8-bit resolution
 Down to 3.35s conversion time with 12-bit resolution
 Differential and single-ended input
 16 single-ended inputs
 16x4 differential inputs without gain
 8x4 differential input with gain
 Built-in differential gain stage
 1/2x, 1x, 2x, 4x, 8x, 16x, 32x, and 64x gain options
 Single, continuous and scan conversion options
 Three internal inputs
 Internal temperature sensor
 V
CC voltage divided by 10
 1.1V bandgap voltage
 Internal and external reference options
 Compare function for accurate monitoring of user defined thresholds
 Optional event triggered conversion for accurate timing
 Optional interrupt/event on compare result
26.2
Overview
The ADC converts analog signals to digital values. The ADC has 12-bit resolution and is capable of converting up to 300
thousand samples per second (ksps). The input selection is flexible, and both single-ended and differential
measurements can be done. For differential measurements, an optional gain stage is available to increase the dynamic
range. In addition, several internal signal inputs are available. The ADC can provide both signed and unsigned results.
The ADC measurements can either be started by application software or an incoming event from another peripheral in
the device. The ADC measurements can be started with predictable timing, and without software intervention.
Both internal and external reference voltages can be used. An integrated temperature sensor is available for use with the
ADC. The V
CC/10 and the bandgap voltage can also be measured by the ADC.
The ADC has a compare function for accurate monitoring of user defined thresholds with minimum software intervention
required.