
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.5.7
MPD6D12*S Specification
15
12.3.
Storage
12.3.1. Please store the products in room where the temperature/humidity is stable and direct sunlight
cannot come in ,and use the products within 6 months after delivery. Avoid damp heated places or
such places where there are large temperature changes, because water may condense on the
products, the characteristics may be reduced in quality, and/or be degraded in the solderability.
If you store the products for a long time (more than 1 year), use caution because the products may be
degraded in the solderability and/or rusty.
Please confirm solderability and characteristics for the products regularly.
12.3.2. Please do not store the products in the places such as :
in a dusty place, in a place exposed directly to sea breeze, in a place in an atmosphere containing
corrosive gas (Cl2, NH3, SO2, NOX and so on).
12.4.
Operation Environment and Conditions
12.4.1. Operation Environment
The products are not waterproof, chemical-proof or rusts proof. In order to prevent leakage of products
and abnormal temperature increase of the products, do not use the products under the following
circumstances:
(1) in an atmosphere containing corrosive gas
(Cl2, NH3, SO2, NOX and so on)
(2) in a dusty place
(3) in a place exposed to direct sunlight
(4) in such a place where water splashes or in such a humid place where water
condenses.
(5) in a place exposed to sea breeze
(6) in any other places similar to the above (1) through (5)
12.4.2. Operation Conditions
Please use the products within specified values (power supply, temperature, input, output and load
condition, and so on). If you use the products over the specified values, it may break the products,
reduce the quality, and even if the products can endure the condition for short time, it may cause
degradation of the reliability. To insert fuse into input or Vin is recommended to secure safety in any
abnormality such as internal Isolated DC-DC Converter circuit broken down. Please do not apply more
voltage than one’s rated output from external circuit to output pins.
12.4.3. Handling
If you apply high static electricity over rated voltage or reverse voltage to the products, it may
cause defects in the products or degrade the reliability.
Please avoid the following items :
(1) over rating voltage apply, reverse voltage apply under measurement or not-enough
connection of 0 V(DC) line
(2) electrostatic discharge by production line and/or operators
(3) electrified appliances by electrostatic induction
Do not give an excessive mechanical shock.
If you drop the products on the floor, etc., it may crack the core of inductors and monolithic
ceramic capacitors.
Do not give strong shocks such as drops in handling.
Flexibility of products is limited up to 0.2mm as bending the substrate