
MPC8347EA PowerQUICC II Pro Integrated Host Processor Hardware Specifications, Rev. 11
96
Freescale Semiconductor
Document Revision History
8
2/2009
In Table 39, corrected tLBKHOV parameter to tLBKLOV (output data is driven on falling edge of clock for output signals.
independent filter circuits,” and “the five AVDD pins” to provide four independent filter circuits,” and
“the four AVDD pins.”
In
Table 58, corrected the max csb_clk to 266 MHz.
In
Table 64, added PLL configurations 903, 923, A03, A23, and 503 for 533 MHz
In
Table 70, updated note 1 to say the following: “For temperature range = C, processor frequency
is limited to 533 (TBGA) and 400 (PBGA) with a platform frequency of 266.”
7
4/2007
In Table 3, “Output Drive Capability,” changed the values in the Output Impedance column and
added USB to the seventh row.
In Table 4, “Operating Frequencies for TBGA,” added column for 400 MHz.
paragraph, added a new paragraph.
Deleted Section 21.8, “JTAG Configuration Signals,” and Figure 43, “JTAG Interface Connection.”
6
3/2007
Page 1, updated first paragraph to reflect PowerQUICC II Pro information.
In Table 18, “DDR and DDR2 SDRAM Input AC Timing Specifications,” added note 2 to tCISKEW
and deleted original note 3; renumbered the remaining notes.
In Figure 43, “JTAG Interface Connection,” updated with new figure.
In Table 57, “Operating Frequencies for TBGA,” in the ‘Coherent system bus frequency (csb_clk)’
row, changed the value in the 533 MHz column to 100-333.
In Table 63, “Suggested PLL Configurations,” under the subhead, ‘33 MHz CLKIN/PCI_CLK
Options,’ added row A03 between Ref. No. 724 and 804. Under the subhead ‘66 MHz
CLKIN/PCI_CLK Options,’ added row 503 between Ref. No. 305 and 404. For Ref. No. 306,
changed the CORE PLL value to 0000110.
In Section 23, “Ordering Information,” replaced first paragraph and added a note.
In Section 23.1, “Part Numbers Fully Addressed by this Document,” replaced first paragraph.
5
1/2007
In Table 1, “Absolute Maximum Ratings,” added (1.36 max for 667-MHz core frequency).
In Table 2, “Recommended Operating Conditions,” added a row showing nominal core supply
voltage of 1.3 V for 667-MHz parts.
In Table 4, “MPC8347EA Power Dissipation,” added two footnotes to 667-MHz row showing
nominal core supply voltage of 1.3 V for 667-MHz parts.
In Table 54, “MPC8347EA (TBGA) Pinout Listing,” updated VDD row to show nominal core supply
voltage of 1.3 V for 667-MHz parts.
4
12/2006
Table 19, “DDR and DDR2 SDRAM Output AC Timing Specifications,” modified Tddkhds for 333 MHz
from 900 ps to 775 ps.
Table 72. Document Revision History (continued)
Rev.
Number
Date
Substantive Change(s)