參數資料
型號： ML9044-51BCVWA
廠商： OKI ELECTRIC INDUSTRY CO LTD
元件分類： 顯示控制器
英文描述： 17 X 120 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC175
封裝： 10.62 X 2.55 MM, GOLD BUMP, DIE-175
文件頁數： 13/60頁
文件大小： 579K
代理商： ML9044-51BCVWA
PEDL9044-03
1Semiconductor
ML9044-xxA/xxB
20/60
2) Large character patterns (5
× 11 dots) (See Table 3-2.)
(1)
A method of writing character patterns to the CGRAM from the CPU
The four CGRAM address bits 0 to 3 select one of the lines constituting a character pattern.
First, set the mode to increment or decrement from the CPU, and then input the CGRAM address.
Write each line of the character pattern code in the CGRAM through DB
0 to DB7.
The data lines DB
0 to DB7 correspond to the CGRAM data bits 0 to 7, respectively (see Table 3-2). Input
data “1” represents the ON status of an LCD dot and “0” represents the OFF status. Since the ADC is
automatically incremented or decremented by 1 after the data is written to the CGRAM, it is not necessary
to set the CGRAM address again.
The bottom line of a character pattern (the CGRAM address bits 0 to 3 are all “1”, which means A in
hexadecimal) is a cursor line. The ON/OFF pattern of this line is ORed with the cursor pattern for
displaying on the LCD. Therefore, the pattern data for the cursor position should be all zeros to display
the cursor.
Whereas the data given by the CGRAM data bits 0 to 4 with the CGRAM addresses 0 to A in hexadecimal
(set by the CGRAM address bits 0 to 3) is output as display data to the LCD, the data given by the
CGRAM data bits 5 to 7 or the CGRAM addresses B to F in hexadecimal is not. These bits can be written
and read as a RAM area.
(2)
A method of displaying CGRAM character patterns on the LCD
The CGRAM is selected when the higher-order 4 bits of a character code are all zeros. Since bits 0 and 3
of a character code are not used, the character pattern “
β” in Table 3-2 can be selected with a character
code “00”, “01”, “08” or “09” in hexadecimal.
When the 8-bit character code corresponding to a character pattern in the CGRAM is written to the
DDRAM, the character pattern is displayed in the display position specified by the DDRAM address.
(The DDRAM data bits 1 and 2 correspond to the CGRAM address bits 4 and 5, respectively.)
相關PDF資料
PDF描述
ML9044-XXACVWA 17 X 120 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC189
ML9044-XXBCVWA 17 X 120 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC175
ML9044A-XXACVWA 17 X 120 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC189
ML9203-01GA 16 X 35 DOTS FLUORESCENT DSPL CTRL, PQFP100
ML9206-XXGS-BK 16 X 37 DOTS FLUORESCENT DSPL CTRL, PQFP64
相關代理商/技術參數
參數描述
ML9044A 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER
ML9044A-XXACVWA 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER
ML9044A-XXBCVWA 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER
ML-90-4-5 功能描述:KNOB BLK MATTE.925"DIA.250"SHAFT RoHS:是 類別:硬件，緊固件，配件 >> 旋鈕 系列:ML 標準包裝:1 系列:- 樣式:圓柱形 類型:開槽 軸尺寸:0.250"（6.35mm） 直徑:1.031"（26.19mm） 高度:0.688"（17.48mm） 指示燈:無指示燈 材質:塑料 顏色:黑 特點:8-32 號固定螺絲
ML-90-4-6 功能描述:KNOB BLK MATTE.925"DIA.125"SHAFT RoHS:是 類別:硬件，緊固件，配件 >> 旋鈕 系列:ML 標準包裝:1 系列:- 樣式:圓柱形 類型:開槽 軸尺寸:0.250"（6.35mm） 直徑:1.031"（26.19mm） 高度:0.688"（17.48mm） 指示燈:無指示燈 材質:塑料 顏色:黑 特點:8-32 號固定螺絲
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*