- 您現在的位置：買賣IC網 > PDF目錄358181 > MIC37139-2.5YSTR (MICREL INC) 2.5 V FIXED POSITIVE LDO REGULATOR, 0.5 V DROPOUT, PDSO3 PDF資料下載
參數資料
| 型號： | MIC37139-2.5YSTR |
| 廠商： | MICREL INC |
| 元件分類： | 固定正電壓單路輸出LDO穩壓器 |
| 英文描述： | 2.5 V FIXED POSITIVE LDO REGULATOR, 0.5 V DROPOUT, PDSO3 |
| 封裝： | LEAD FREE, TO-261, SOT-223, 3 PIN |
| 文件頁數： | 9/10頁 |
| 文件大小： | 741K |
| 代理商： | MIC37139-2.5YSTR |
Micrel, Inc.
MIC37139
Transient Response and 3.3V to 2.5V, 2.5V to 1.8V
or1.65V, or 2.5V to 1.5V Conversions
The MIC37139 has excellent transient response to
variations in input voltage and load current. The device
has been designed to respond quickly to load current
variations and input voltage variations. Large output
capacitors are not required to obtain this performance. A
standard 10μF output capacitor, preferably tantalum, is
all that is required. Larger values help to improve
performance even further.
By virtue of its low-dropout voltage, this device does not
saturate into dropout as readily as similar NPN-based
designs. When converting from 3.3V to 2.5V, 2.5V to
1.8V or 1.65V, or 2.5V to 1.5V, the NPN-based
regulators are already operating in dropout, with typical
November 2009
9
M9999-110209
dropout requirements of 1.2V or greater. To convert
down to 2.5V without operating in dropout, NPN-based
regulators require an input voltage of 3.7V at the very
least. The MIC37139 regulator will provide excellent
performance with an input as low as 3.0V or 2.25V,
respectively. This gives the PNP-based regulators a
distinct advantage over older, NPN-based linear
regulators.
Minimum Load Current
The MIC37139 regulator is specified between finite
loads. If the output current is too small, leakage currents
dominate and the output voltage rises. A 10mA minimum
load current is necessary for proper operation.
相關PDF資料 |
PDF描述 |
|---|---|
| MIC39501-1.8WUTR | 1.8 V FIXED POSITIVE LDO REGULATOR, 0.575 V DROPOUT, PSSO5 |
| MIC39501-2.5WUTR | 2.5 V FIXED POSITIVE LDO REGULATOR, 0.575 V DROPOUT, PSSO5 |
| MIC5201YMTR | ADJUSTABLE POSITIVE LDO REGULATOR, 0.4 V DROPOUT, PDSO8 |
| MIC5201-3.0YMTR | 3 V FIXED POSITIVE LDO REGULATOR, 0.4 V DROPOUT, PDSO8 |
| MIC5201-3.0YSTR | 3 V FIXED POSITIVE LDO REGULATOR, 0.4 V DROPOUT, PDSO3 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MIC-3714 | 制造商:ADVANTECH 制造商全稱:Advantech Co., Ltd. 功能描述:250 kS/s, 16-bit, 16-ch CPCI Multifunction Card |
| MIC37150 | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:1.5 A LOW VOLTAGE UCAP LDO REGULATOR |
| MIC37150_07 | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:1.5A, Low Voltage μCap LDO Regulator |
| MIC37150-1.5BR | 功能描述:IC REG LDO 1.5V 1.5A S-PAK-3 RoHS:否 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 系列:- 標準包裝:3,000 系列:- 穩壓器拓?fù)浣Y(jié)構:正，固定式 輸出電壓:3.8V 輸入電壓:最高 16V 電壓 - 壓降（標準）:0.3V @ 80mA 穩壓器數量:1 電流 - 輸出:80mA 電流 - 限制（最?。?- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SC-74A，SOT-753 供應商設備封裝:SOT-23-5 包裝:帶卷 (TR) 其它名稱:MIC5203-3.8BM5TRMIC5203-3.8BM5TR-ND |
| MIC37150-1.5BR TR | 功能描述:IC REG LDO 1.5V 1.5A S-PAK-3 RoHS:否 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 系列:- 標準包裝:3,000 系列:- 穩壓器拓?fù)浣Y(jié)構:正，固定式 輸出電壓:3.8V 輸入電壓:最高 16V 電壓 - 壓降（標準）:0.3V @ 80mA 穩壓器數量:1 電流 - 輸出:80mA 電流 - 限制（最?。?- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SC-74A，SOT-753 供應商設備封裝:SOT-23-5 包裝:帶卷 (TR) 其它名稱:MIC5203-3.8BM5TRMIC5203-3.8BM5TR-ND |
發布緊急采購，3分鐘左右您將得到回復。