參數資料
型號: MCP6024-E/SL
廠商: Microchip Technology
文件頁數: 11/42頁
文件大?。?/td> 0K
描述: IC OPAMP QUAD 2.5V 10MHZ 14SOIC
標準包裝: 57
放大器類型: 通用
電路數: 4
輸出類型: 滿擺幅
轉換速率: 7 V/µs
增益帶寬積: 10MHz
電流 - 輸入偏壓: 1pA
電壓 - 輸入偏移: 500µV
電流 - 電源: 1mA
電流 - 輸出 / 通道: 30mA
電壓 - 電源,單路/雙路(±): 2.5 V ~ 5.5 V
工作溫度: -40°C ~ 125°C
安裝類型: 表面貼裝
封裝/外殼: 14-SOIC(0.154",3.90mm 寬)
供應商設備封裝: 14-SOIC
包裝: 管件
產品目錄頁面: 679 (CN2011-ZH PDF)
2009 Microchip Technology Inc.
DS21685D-page 19
MCP6021/1R/2/3/4
4.6
MCP6021 and MCP6023 Reference
Voltage
The single op amps (MCP6021 and MCP6023), not in
the SOT-23-5 package, have an internal mid-supply
reference voltage connected to the VREF pin (see
Figure 4-7). The MCP6021 has CS internally tied to
VSS, which always keeps the op amp on and always
provides a mid-supply reference. With the MCP6023,
taking the CS pin high conserves power by shutting
down both the op amp and the VREF circuitry. Taking
the CS pin low turns on the op amp and VREF circuitry.
FIGURE 4-7:
Simplified internal VREF
circuit (MCP6021 and MCP6023 only).
See Figure 4-8 for a non-inverting gain circuit using the
internal
mid-supply
reference.
The
DC-blocking
capacitor (CB) also reduces noise by coupling the op
amp input to the source.
FIGURE 4-8:
Non-inverting gain circuit
using VREF (MCP6021 and MCP6023 only).
To use the internal mid-supply reference for an
inverting gain circuit, connect the VREF pin to the
non-inverting input, as shown in Figure 4-9. The
capacitor CB helps reduce power supply noise on the
output.
FIGURE 4-9:
Inverting gain circuit using
VREF (MCP6021 and MCP6023 only).
If you don’t need the mid-supply reference, leave the
VREF pin open.
4.7
Supply Bypass
With this family of operational amplifiers, the power
supply pin (VDD for single supply) should have a local
bypass capacitor (i.e., 0.01 F to 0.1 F) within 2 mm
for good, high-frequency performance. It also needs a
bulk capacitor (i.e., 1 F or larger) within 100 mm to
provide large, slow currents. This bulk capacitor can be
shared with nearby analog parts.
4.8
Unused Op Amps
An unused op amp in a quad package (MCP6024)
should be configured as shown in Figure 4-10. These
circuits prevent the output from toggling and causing
crosstalk. Circuits A sets the op amp at its minimum
noise gain. The resistor divider produces any desired
reference voltage within the output voltage range of the
op amp; the op amp buffers that reference voltage.
Circuit B uses the minimum number of components
and operates as a comparator, but it may draw more
current.
FIGURE 4-10:
Unused Op Amps.
VDD
VSS
VREF
CS
50 k
Ω
50 k
Ω
(CS tied internally to VSS for MCP6021)
5M
Ω
VIN
RG
RF
VOUT
CB
VREF
VIN
RG
RF
VOUT
VREF
CB
VDD
MCP6024 (A)
MCP6024 (B)
R1
R2
VDD
VREF
V
REF
V
DD
R
2
R
1
R
2
+
-------------------
×
=
相關PDF資料
PDF描述
MCP6V01T-E/MNY IC OPAMP AUTO-ZERO SGL 8-TDFN
0741620230 CONN RCPT R/A 30POS 2.54MM GOLD
MCP6024-I/P IC OPAMP 2.5V QUAD R-R 14DIP
0751020003 CONN VT CPI B/A HDR GOLD 8POS
MCP6024-E/P IC OPAMP QUAD 2.5V 10MHZ 14DIP
相關代理商/技術參數
參數描述
MCP6024-I/MS 制造商:MICROCHIP 制造商全稱:Microchip Technology 功能描述:Rail-to-Rail Input/Output, 10 MHz Op Amps
MCP6024-I/OT 制造商:MICROCHIP 制造商全稱:Microchip Technology 功能描述:Rail-to-Rail Input/Output, 10 MHz Op Amps
MCP6024-I/P 功能描述:運算放大器 - 運放 Quad 2.5V 10MHz RoHS:否 制造商:STMicroelectronics 通道數量:4 共模抑制比(最小值):63 dB 輸入補償電壓:1 mV 輸入偏流(最大值):10 pA 工作電源電壓:2.7 V to 5.5 V 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 轉換速度:0.89 V/us 關閉:No 輸出電流:55 mA 最大工作溫度:+ 125 C 封裝:Reel
MCP6024-I/P 制造商:Microchip Technology Inc 功能描述:Operational Amplifier (Op-Amp) IC
MCP6024-I/SL 功能描述:運算放大器 - 運放 Quad 2.5V 10MHz RoHS:否 制造商:STMicroelectronics 通道數量:4 共模抑制比(最小值):63 dB 輸入補償電壓:1 mV 輸入偏流(最大值):10 pA 工作電源電壓:2.7 V to 5.5 V 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 轉換速度:0.89 V/us 關閉:No 輸出電流:55 mA 最大工作溫度:+ 125 C 封裝:Reel