
Chapter 24 128 KByte Flash Module (S12XFTM128K2V1)
MC9S12XE-Family Reference Manual , Rev. 1.13
Freescale Semiconductor
927
Figure 24-27. Flash Module Interrupts Implementation
24.4.4
Wait Mode
The Flash module is not affected if the MCU enters wait mode. The Flash module can recover the MCU
24.4.5
Stop Mode
If a Flash command is active (CCIF = 0) or an EE-Emulation operation is pending when the MCU requests
stop mode, the current Flash operation will be completed before the CPU is allowed to enter stop mode.
24.4.6
Background Debug Mode
In background debug mode (BDM), the FPROT register is writable. If the MCU is unsecured, then all
Flash commands described in
Section 24.4.2 can be executed unless otherwise noted. If the MCU is
secured and is in special single chip mode, the following Flash commands are available:
Erase Verify All Blocks (0x01)
Erase Verify Block (0x02)
Erase All Blocks (0x08)
Flash Error Interrupt Request
CCIF
CCIE
EPVIOLIF
EPVIOLIE
ERSVIF1
ERSVIE1
ERSVIF0
ERSVIE0
PGMERIF
PGMERIE
ERSERIF
ERSERIE
Flash Command Interrupt Request
DFDIF
DFDIE
SFDIF
SFDIE