- 您現在的位置：買賣IC網 > PDF目錄369910 > MC78M08ABDTG (ON SEMICONDUCTOR) (-)7Vout 0.55Amp Wide-Input Plus to Minus Voltage ISR 3-SIP MODULE PDF資料下載
參數資料
| 型號： | MC78M08ABDTG |
| 廠商： | ON SEMICONDUCTOR |
| 元件分類： | 基準電壓源/電流源 |
| 英文描述： | (-)7Vout 0.55Amp Wide-Input Plus to Minus Voltage ISR 3-SIP MODULE |
| 中文描述： | 8 V FIXED POSITIVE REGULATOR, PSSO2 |
| 封裝： | LEAD FREE, PLASTIC, DPAK-3 |
| 文件頁數： | 9/12頁 |
| 文件大?。?/td> | 189K |
| 代理商： | MC78M08ABDTG |
MC78M00 MC78M00A Series
APPLICATIONS INFORMATION
9
MOTOROLA ANALOG IC DEVICE DATA
Design Considerations
The MC78M00/MC78M00A Series of fixed voltage
regulators are designed with Thermal Overload Protection
that shuts down the circuit when subjected to an excessive
power overload condition, Internal Short Circuit Protection
that limits the maximum current the circuit will pass, and
Output Transistor Safe–Area Compensation that reduces the
output short circuit current as the voltage across the pass
transistor is increased.
In many low current applications, compensation
capacitors are not required. However, it is recommended that
the regulator input be bypassed with a capacitor if the
regulator is connected to the power supply filter with long wire
lengths, or if the output load capacitance is large. An input
bypass capacitor should be selected to provide good high
frequency characteristics to insure stable operation under all
load conditions. A 0.33
μ
F or larger tantalum, mylar, or other
capacitor having low internal impedance at high frequencies
should be chosen. The bypass capacitor should be mounted
with the shortest possible leads directly across the
regulator’s input terminals. Normally good construction
techniques should be used to minimize ground loops and
lead resistance drops since the regulator has no external
sense lead.
Figure 9. Current Regulator
Figure 10. Adjustable Output Regulator
Figure 11. Current Boost Regulator
Figure 12. Current Boost with
Short Circuit Protection
The MC78M00 regulators can also be used as a current source
when connected as above. In order to minimize dissipation the
MC78M05C is chosen in this application. Resistor R determines
the current as follows:
For example, a 500 mA current source would require R to be a
5.0
, 10 W resistor and the output voltage compliance would
be the input voltage less 7.0 V.
IO =
5.0 V
R
+ IIB
IIB = 1.5 mA over line and load changes.
Input
0.33
μ
F
R
IO
MC78M05C
Constant
Current to
Grounded
Load
The addition of an operational amplifier allows adjustment to higher
or intermediate values while retaining regulation characteristics.
The minimum voltage obtainable with this arrangement is 2.0 V
greater than the regulator voltage.
Input
MC78M05C
Output
0.33
μ
F
10 k
MC1741
7
6
4
1.0 k
0.1
μ
F
3
2
The MC78M00 series can be current boosted with a PNP
transistor. The MJ2955 provides current to 5.0 A. Resistor R in
conjunction with the VBE of the PNP determines when the pass
transistor begins conducting; this circuit is not short circuit
proof. Input–output differential voltage minimum is increased
by VBE of the pass transistor.
XX = 2 digits of type number indicating voltage.
MC78MXXC
Input
Output
R
1.0
μ
F
MJ2955 or Equiv.
1.0
μ
F
The circuit of Figure NO TAG can be modified to provide supply
protection against short circuits by adding a short circuit sense
resistor, Rsc, and an additional PNP transistor. The current sensing
PNP must be able to handle the short circuit current of the
three–terminal regulator .Therefore, a 4.0 A plastic power transistor
is specified.
XX = 2 digits of type number indicating voltage.
1.0
μ
F
MC78MXXC
MJ2955
or Equiv.
Input
Output
RSC
R
2N6049
or Equiv.
VO, 7.0 V to 20 V
Vin–Vout
≥
2.0 V
+
相關PDF資料 |
PDF描述 |
|---|---|
| MC78M08ABDTRK | (-)8Vout 0.55Amp Wide-Input Plus to Minus Voltage ISR 3-SIP MODULE |
| MC78M08ABT | (-)9Vout 0.55Amp Wide-Input Plus to Minus Voltage ISR 3-SIP MODULE |
| MC78M08ABTG | (-)9Vout 0.55Amp Wide-Input Plus to Minus Voltage ISR 3-SIP MODULE |
| MC78M08ACDT | 5.0 AMP POSITIVE VOLTAGE REGULATOR |
| MC78M08ACDTG | (-)12Vout 0.4Amp Wide-Input Plus to Minus Voltage ISR 3-SIP MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MC78M08ABDTRK | 功能描述:線性穩壓器 - 標準 8V 500mA Positive RoHS:否 制造商:STMicroelectronics 輸出類型: 極性: 輸出電壓:1.8 V 輸出電流:150 mA 負載調節: 最大輸入電壓:5.5 V 線路調整率: 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOT-323-5L |
| MC78M08ABDTRKG | 功能描述:線性穩壓器 - 標準 8V 500mA Positive RoHS:否 制造商:STMicroelectronics 輸出類型: 極性: 輸出電壓:1.8 V 輸出電流:150 mA 負載調節: 最大輸入電壓:5.5 V 線路調整率: 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOT-323-5L |
| MC78M08ABT | 功能描述:線性穩壓器 - 標準 8V 500mA Positive RoHS:否 制造商:STMicroelectronics 輸出類型: 極性: 輸出電壓:1.8 V 輸出電流:150 mA 負載調節: 最大輸入電壓:5.5 V 線路調整率: 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOT-323-5L |
| MC78M08ABTG | 功能描述:線性穩壓器 - 標準 8V 500mA Positive RoHS:否 制造商:STMicroelectronics 輸出類型: 極性: 輸出電壓:1.8 V 輸出電流:150 mA 負載調節: 最大輸入電壓:5.5 V 線路調整率: 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOT-323-5L |
| MC78M08ACDT | 功能描述:線性穩壓器 - 標準 8V 500mA Positive RoHS:否 制造商:STMicroelectronics 輸出類型: 極性: 輸出電壓:1.8 V 輸出電流:150 mA 負載調節: 最大輸入電壓:5.5 V 線路調整率: 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SOT-323-5L |
發布緊急采購，3分鐘左右您將得到回復。