MOTOROLA
M68020 USER’S MANUAL
3- 3
Table 3-1. Signal Index
Signal Name
Mnemonic
Function
Function Codes
FC2–FC0
3-bit function code used to identify the address space of each bus cycle.
Address Bus
MC68020
MC68EC020
A31–A0
A23–A0
32-bit address bus
24-bit address bus
Data Bus
D31–D0
32-bit data bus used to transfer 8, 16, 24, or 32 bits of data per bus
cycle.
Size
SIZ1, SIZ0
Indicates the number of bytes remaining to be transferred for this cycle.
These signals, together with A1 and A0, define the active sections of the
data bus.
*External Cycle Start
ECS
Provides an indication that a bus cycle is beginning.
*Operand Cycle Start
OCS
Identical operation to that of
ECS except that OCS is asserted only during
the first bus cycle of an operand transfer.
Read/Write
R/
W
Defines the bus transfer as a processor read or write.
Read-Modify-Write Cycle
RMC
Provides an indicator that the current bus cycle is part of an indivisible
read-modify-write operation.
Address Strobe
AS
Indicates that a valid address is on the bus.
Data Strobe
DS
Indicates that valid data is to be placed on the data bus by an external
device or has been placed on the data bus by the MC68020/EC020.
*Data Buffer Enable
DBEN
Provides an enable signal for external data buffers.
Data Transfer and Size
Acknowledge
DSACK1,
DSACK0
Bus response signals that indicate the requested data transfer operation
has completed. In addition, these two lines indicate the size of the
external bus port on a cycle-by-cycle basis and are used for
asynchronous transfers.
Interrupt Priority Level
IPL2–IPL0
Provides an encoded interrupt level to the processor.
*Interrupt Pending
IPEND
Indicates that an interrupt is pending.
Autovector
AVEC
Requests an autovector during an interrupt acknowledge cycle.
Bus Request
BR
Indicates that an external device requires bus mastership.
Bus Grant
BG
Indicates that an external device may assume bus mastership.
*Bus Grant Acknowledge
BGACK
Indicates that an external device has assumed bus mastership.
Reset
RESET
System reset.
Halt
HALT
Indicates that the processor should suspend bus activity or that the
processor has halted due to a double bus fault.
Bus Error
BERR
Indicates that an erroneous bus operation is being attempted.
Cache Disable
CDIS
Statically disables the on-chip cache to assist emulator support.
Clock
CLK
Clock input to the processor.
Power Supply
VCC
Power supply.
Ground
GND
Ground connection.
*This signal is implemented in the MC68020 and not implemented in the MC68EC020.
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
..
.