- 您現在的位置：買賣IC網 > PDF目錄9494 > MC14066BFG (ON Semiconductor)IC MULTIPLEXER QUAD 4X1 14SOEIAJ PDF資料下載
參數資料
| 型號： | MC14066BFG |
| 廠商： | ON Semiconductor |
| 文件頁數： | 11/12頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC MULTIPLEXER QUAD 4X1 14SOEIAJ |
| 標準包裝： | 50 |
| 系列： | 4000B |
| 類型： | 雙向 FET 開關 |
| 電路： | 1 x 1:1 |
| 獨立電路： | 4 |
| 電壓電源： | 雙電源 |
| 電源電壓： | 3 V ~ 18 V |
| 工作溫度： | -55°C ~ 125°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 14-SOIC（0.209"，5.30mm 寬） |
| 供應商設備封裝： | SOEIAJ-14 |
| 包裝： | 管件 |
| 其它名稱： | MC14066BFG-ND MC14066BFGOS |
MC14066B
http://onsemi.com
8
APPLICATIONS INFORMATION
Figure A illustrates use of the Analog Switch. The
0to5 V digital control signal is used to directly control a
5 V peaktopeak analog signal.
The digital control logic levels are determined by VDD
and VSS. The VDD voltage is the logic high voltage, the VSS
voltage is logic low. For the example, VDD = + 5 V = logic
high at the control inputs; VSS = GND = 0 V = logic low.
The maximum analog signal level is determined by VDD
and VSS. The analog voltage must not swing higher than
VDD or lower than VSS.
The example shows a 5 V peaktopeak signal which
allows no margin at either peak. If voltage transients above
VDD and/or below VSS are anticipated on the analog
channels, external diodes (Dx) are recommended as shown
in Figure B. These diodes should be small signal types able
to absorb the maximum anticipated current surges during
clipping.
The absolute maximum potential difference between
VDD and VSS is 18 V. Most parameters are specified up to
15 V which is the recommended maximum difference
between VDD and VSS.
Figure A. Application Example
+5 V
VDD
VSS
5 Vp-p
ANALOG SIGNAL
0-TO-5 V DIGITAL
CONTROL SIGNALS
SWITCH
IN
MC14066B
SWITCH
OUT
5 Vp-p
ANALOG SIGNAL
+5.0 V
+ 2.5 V
GND
+5 V
EXTERNAL
CMOS
DIGITAL
CIRCUITRY
Figure B. External Germanium or Schottky Clipping Diodes
VDD
VSS
DX
SWITCH
IN
SWITCH
OUT
相關PDF資料 |
PDF描述 |
|---|---|
| VE-B0T-MY-S | CONVERTER MOD DC/DC 6.5V 50W |
| VE-B0R-MY-S | CONVERTER MOD DC/DC 7.5V 50W |
| VI-B4W-IU | CONVERTER MOD DC/DC 5.5V 200W |
| V300A3V3M200B2 | CONVERTER MOD DC/DC 3.3V 200W |
| VI-B40-IU | CONVERTER MOD DC/DC 5V 200W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MC14066BFL1 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MC14066BFR1 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MC14066BFR2 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MC14066RFL2 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MC14067 | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:Analog Multiplexers/Demultiplexers |
發布緊急采購，3分鐘左右您將得到回復。