Semiconductor Components Industries, LLC, 2011
June, 2011 Rev. 8
1
Publication Order Number:
MC14060B/D
MC14060B
14-Bit Binary Counter and
Oscillator
The MC14060B is a 14stage binary ripple counter with an onchip
oscillator buffer. The oscillator configuration allows design of either
RC or crystal oscillator circuits. Also included on the chip is a reset
function which places all outputs into the zero state and disables the
oscillator. A negative transition on Clock will advance the counter to
the next state. Schmitt trigger action on the input line permits very
slow input rise and fall times. Applications include time delay circuits,
counter controls, and frequency dividing circuits.
This device contains protection circuitry to guard against damage due
to high static voltages or electric fields. However, precautions must be
taken to avoid applications of any voltage higher than maximum rated
voltages to this highimpedance circuit. For proper operation, Vin and
Vout should be constrained to the range VSS v (Vin or Vout) v VDD.
Unused inputs must always be tied to an appropriate logic voltage
level (e.g., either VSS or VDD). Unused outputs must be left open.
Features
Fully Static Operation
Diode Protection on All Inputs
Supply Voltage Range = 3.0 V to 18 V
Capable of Driving Two Lowpower TTL Loads or One
Lowpower Schottky TTL Load Over the Rated Temperature
Range
Buffered Outputs Available from Stages 4 Through 10 and
12 Through 14
Common Reset Line
PinforPin Replacement for CD4060B
These Devices are PbFree and are RoHS Compliant
MAXIMUM RATINGS (Voltages Referenced to VSS)
Symbol
Parameter
Value
Unit
VDD
DC Supply Voltage Range
0.5 to +18.0
V
Vin,
Vout
Input or Output Voltage Range
(DC or Transient)
0.5 to VDD
+0.5
V
Iin,
Iout
Input or Output Current
(DC or Transient) per Pin
±10
mA
PD
Power Dissipation, per Package
500
mW
TA
Ambient Temperature Range
55 to +125
°C
Tstg
Storage Temperature Range
65 to +150
°C
TL
Lead Temperature (8 Second Soldering)
260
°C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. Temperature Derating: Plastic “P and D/DW” Packages: –7.0 mW/°C from
65°C To 125°C.
http://onsemi.com
See detailed ordering and shipping information in the package
dimensions section on page
2 of this data sheet.
ORDERING INFORMATION
MARKING
DIAGRAMS
PDIP16
P SUFFIX
CASE 648
MC14060BCP
AWLYYWWG
SOIC16
D SUFFIX
CASE 751B
TSSOP16
DT SUFFIX
CASE 948F
14060BG
AWLYWW
SOEIAJ16
F SUFFIX
CASE 966
MC14060B
ALYWG
16
1
16
1
16
14
060B
ALYW G
G
1
16
A
= Assembly Location
WL, L
= Wafer Lot
YY, Y
= Year
WW, W = Work Week
G or G
= PbFree Package
(Note: Microdot may be in either location)