- 您現在的位置：買賣IC網 > PDF目錄378657 > MC12147SD (MOTOROLA INC) LOW POWER VOLTAGE CONTROLLED OSCILLATOR BUFFER PDF資料下載
參數資料
| 型號： | MC12147SD |
| 廠商： | MOTOROLA INC |
| 元件分類： | 模擬信號調理 |
| 英文描述： | LOW POWER VOLTAGE CONTROLLED OSCILLATOR BUFFER |
| 中文描述： | SPECIALTY ANALOG CIRCUIT, PDSO8 |
| 封裝： | PLASTIC, SSOP-8 |
| 文件頁數： | 1/13頁 |
| 文件大?。?/td> | 210K |
| 代理商： | MC12147SD |
8
1
NC
VCC
7
2
Q
CNTL
6
3
GND
TANK
5
4
QB
VREF
Device
Operating
Temperature Range
Package
SEMICONDUCTOR
TECHNICAL DATA
LOW POWER
VOLTAGE CONTROLLED
OSCILLATOR BUFFER
ORDERING INFORMATION
MC12147D
MC12147SD
TA = – 40
°
to +85
°
C
SO–8
SSOP–8
D SUFFIX
PLASTIC PACKAGE
CASE 751
(SO–8)
8
1
(Top View)
PIN CONNECTIONS
Order this document by MC12147/D
SD SUFFIX
PLASTIC PACKAGE
CASE 940
(SSOP–8)
8
1
The MC12147 is intended for applications requiring high frequency signal
generation up to 1300 MHz. An external tank circuit is used to determine the
desired frequency of operation. The VCO is realized using an
emitter–coupled pair topology. The MC12147 can be used with an integrated
PLL IC such as the MC12202 1.1 GHz Frequency Synthesizer to realize a
complete PLL sub–system. The device is specified to operate over a voltage
supply range of 2.7 to 5.5 V. It has a typical current consumption of 13 mA at
3.0 V which makes it attractive for battery operated handheld systems.
NOTE: The MC12147 is NOT suitable as a crystal oscillator.
Operates Up to 1.3 GHz
Space–Efficient 8–Pin SOIC or SSOP Package
Low Power 13 mA Typical @ 3.0 V Operation
Supply Voltage of 2.7 to 5.5 V
Typical 900MHz Performance
– Phase Noise –105 dBc/Hz @ 100 kHz Offset
– Tuning Voltage Sensitivity of 20 MHz/V
Output Amplitude Adjustment Capability
Two High Drive Outputs With a Typical Range from –8.0 to –2.0 dBm
The device has two high frequency outputs which make it attractive for
transceiver applications which require both a transmit and receive local
oscillator (LO) signal. The outputs Q and QB are available for servicing the
receiver IF and transmitter up–converter single–ended. In receiver
applications, the outputs can be used together if it is necessary to generate a
differential signal for the receiver IF. Because the Q and QB outputs are open
collector, terminations to the VCC supply are required for proper operation.
Since the outputs are complementary, BOTH outputs must be terminated
even if only one is needed. The Q and QB outputs have a nominal drive level
of –8dBm to conserve power. If addition signal amplitude is needed, a level
adjustment pin (CNTL) is available, which when tied to ground, boosts the
nominal output levels to –2.0 dBm.
External components required for the MC12147 are: (1) tank circuit (LC
network); (2) Inductor/capacitor to provide the termination for the open
collector outputs; and (3) adequate supply voltage bypassing. The tank
circuit consists of a high–Q inductor and varactor components. The
preferred tank configuration allows the user to tune the VCO across the full
supply range. VCO performance such as center frequency, tuning voltage
sensitivity, and noise characteristics are dependent on the particular
components and configuration of the VCO tank circuit.
PIN NAMES
Pin
Function
VCC
CNTL
TANK
VREF
QB
GND
Q
Power Supply
Amplitude Control for Q, QB Output Pair
Tank Circuit Input
Bias Voltage Output
Open Collector Output
Ground
Open Collector Output
Motorola, Inc. 1997
Rev 2
相關PDF資料 |
PDF描述 |
|---|---|
| MC12148D | Switch Mode Power Supply; Series:MFA; Output Voltage:12VDC; Output Power Max:350W; Output Current:29A; Number of Outputs:1; Efficiency:86%; External Depth:3.20"; External Height:1.50"; External Width:6.80" |
| MC12148SD | PSU, 350W 24V SINGLE O/P ; Voltage, output:24V; Current, output:14.5A; Power rating:350W; Voltage, supply min:90V; Voltage, supply max:264V; Length / Height, external:38.1mm; Width, external:81.3mm; Depth, external:172mm; Current, |
| MC12202D | MECL PLL COMPONENTS Serial Input PLL Frequency Synthesizer |
| MC12202 | MECL PLL COMPONENTS Serial Input PLL Frequency Synthesizer |
| MC12202DT | MECL PLL COMPONENTS Serial Input PLL Frequency Synthesizer |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MC12148 | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:LOW POWER VOLTAGE CONTROLLED OSCILLATOR |
| MC12148D | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:LOW POWER VOLTAGE CONTROLLED OSCILLATOR |
| MC12148SD | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:LOW POWER VOLTAGE CONTROLLED OSCILLATOR |
| MC12149 | 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:LOW POWER VOLTAGE CONTROLLED OSCILLATOR BUFFER |
| MC12149D | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:LOW POWER VOLTAGE CONTROLLED OSCILLATOR BUFFER |
發布緊急采購，3分鐘左右您將得到回復。