![](http://datasheet.mmic.net.cn/330000/MB95F134MBS_datasheet_16438292/MB95F134MBS_5.png)
MB95130MB Series
5
(Continued)
Part number
*1 : For ROM capacity and RAM capacity, refer to “
■
MEMORY LINEUP”.
*2 : For details of option, refer to “
■
MASK OPTION”.
*3 : Specify clock mode when ordering MASK ROM.
*4 : Embedded Algorithm is a trade mark of Advanced Micro Devices Inc.
Note : Part number of evaluation product in MB95130MB series is MB95FV100D-103.
When using it, the MCU board (MB2146-303A) is required.
Parameter
8/16-bit
compound
timer
(1 channel)
MB95136MB
MB95
F133MBS/
F134MBS/
F136MBS
MB95
F133NBS/
F134NBS/
F136NBS
MB95
F133MBW/
F134MBW/
F136MBW
MB95
F133NBW/
F134NBW/
F136NBW
MB95
F133JBS/
F134JBS/
F136JBS
MB95
F133JBW/
F134JBW/
F136JBW
P
Each channel of the timer can be used as “8-bit timer x 2 channels” or “16-bit timer x 1 channel”.
Built-in timer function, PWC function, PWM function, capture function and square wave-form output
Count clock: 7 internal clocks and external clock can be selected.
16-bit PPG
(1 channel)
PWM mode or one-shot mode can be selected.
Counter operating clock: Eight selectable clock sources
Support for external trigger start
Each channel of the PPG can be used as “8-bit PPG x 2 channels” or “16-bit PPG x 1 channel”.
Counter operating clock: Eight selectable clock sources
8/16-bit PPG
(1 channel)
Watch
counter
(for dual
clock
product)
(1 channel)
Watch
prescaler
(for dual
clock
product)
(1 channel)
External
interrupt
(8 channels)
Count clock : Four selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)
Counter value can be set from 0 to 63. (Capable of counting for 1 minute when selecting clock
source 1 second and setting counter value to 60)
Four selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
Interrupt by edge detection (rising, falling, or both edges can be selected.)
Can be used to recover from standby modes.
Flash memory
Supports automatic programming, Embedded Algorithm
TM
*
4
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Number of write/erase cycles (Minimum) : 10000 times
Data retention time : 20 years
Erase can be performed on each block
Block protection with external programming voltage
Flash Security Feature for protecting the content of the Flash
(MB95F136MBS/F136NBS/F136JBS/F136MBW/F136NBW/F136JBW)
Standby mode Sleep, stop, watch (for dual clock product), and timebase timer