
MB90860A Series
3
(Continued)
Timer
Time-base timer, clock timer, watchdog timer : 1 channel
8/16-bit PPG timer : 8-bit X 16 channels, or 16-bit X 8 channels
16-bit reload timer : 4 channels
16- bit input/output timer
- 16-bit free run timer : 2 channel (FRT0 : ICU 0/1/2/3, OCU 0/1/2/3, FRT1 : ICU 4/5/6/7, OCU 4/5/6/7)
- 16- bit input capture: (ICU) : 8 channels
- 16-bit output compare : (OCU) : 8 channels
UART (LIN/SCI) : 4 channels
Equipped with full-duplex double buffer
Clock-asynchronous or clock-synchronous serial transmission is available
I
2
C interface* : 2 channels
Up to 400 kbit/s transfer rate
DTP/External interrupt : 16 channels, CAN wakeup : 2 channels
Module for activation of extended intelligent I/O service (EI
2
OS), DMA, and generation of external interrupt.
Delay interrupt generator module
Generates interrupt request for task switching.
8/10-bit A/D converter : 24 channels
Resolution is selectable between 8-bit and 10-bit.
Activation by external trigger input is allowed.
Conversion time : 3
μ
s (at 24-MHz machine clock, including sampling time)
Program patch function
Address matching detection for 6 address pointers.
Internal voltage regulator
Supports 3 V MCU core, offering low EMI and low power consumption figures
Programmable input levels
Automotive/CMOS-Schmitt (initial level is Automotive in Single chip mode)
TTL level (initial level for External bus mode)
ROM security function
Protects the content of ROM (MASK ROM device only)
Flash security function
Protects the content of Flash (Flash device only)
External bus interface
Clock monitor function
* : I
2
C license :
Purchase of Fujitsu I
2
C components conveys a license under the Philips I
2
C Patent Rights to use, these com-
ponents in an I
2
C system provided that the system conforms to the I
2
C standard Specification as defined by
Philips.