參數資料
型號： MB90F443G
廠商： Fujitsu Limited
英文描述： 16-bit Proprietary Microcontroller
中文描述： 16位微控制器專有
文件頁數： 16/61頁
文件大?。?/td> 644K
代理商： MB90F443G
MB90440G Series
16
6.
Pull-up/down resistors
The MB90440G Series does not support internal pull-up/down resistors (except pull-up resistors of port 0 to
port 3) . Use external components needed.
Crystal Oscillator Circuit
7.
Noises around X0 or X1 pins may cause abnormal operations. Make sure to provide bypass capacitors via the
shortest distances from X0 and X1 pins, crystal oscillator (or ceramic resonator) and ground lines, and make
sure, to the utmost effort, that lines of oscillation circuits do not cross the lines of other circuits.
It is highly recommended to provide a printed circuit board artwork surrounding X0 and X1 pins with a ground
area for stabilizing the operation.
Turning-on Sequence of Power Supply to A/D Converter and Analog Inputs
8.
Make sure to turn on the A/D and D/A converters power supply (AV
CC
, AVRH, AVRL) and analog inputs (AN0 to
AN7) after turning on the digital power supply (V
CC
) .
Turn off the digital power after turning off the A/D converter supply and analog inputs. In this case, make sure
that AVRH does not exceed AV
CC
(turning on/off the analog and digital power supplies simultaneously is accept-
able) .
Connection of Unused Pins of A/D Converter
Connect unused pins of A/D and D/A converters to AV
CC
=
V
CC
, AV
SS
=
AVRH
=
V
SS
.
10. N.C. Pin
9.
The N.C. (internally connected) pin must be opened for use.
11. Notes on Energization
To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during energization at 50
μ
s or more (0.2 V to 2.7 V) .
12. Initialization
In the device, there are internal registers which are initialized only by a power-on reset. To initialize these registers,
please turn on the power again.
13. Using REALOS
The use of (EI
2
OS) is not possible with the REALOS real time operation system.
14. Caution on Operations during PLL Clock Mode
If the PLL clock mode is selected in the microcontroller, it may attempt to continue the operation using the free-
running frequency of the automatic oscillating circuit in the PLL circuitly even if the oscillator is out of place or
the clock input is stopped. Performance of this operation, however, cannot be guaranteed.
相關PDF資料
PDF描述
MB90F443GPF 16-bit Proprietary Microcontroller
MB90V440G Photoelectric Sensor; Sensor Input Type:Optical; Sensing Range Max:2m; Sensor Output Type:NPN/PNP DO; Leaded Process Compatible:No; Output Type:DO; Peak Reflow Compatible (260 C):No; Sensor Housing:Rectangular; Supply Voltage:30VDC
MB90V440GCR Photoelectric Sensor; Sensor Input Type:Optical; Sensing Range Max:8m; Leaded Process Compatible:No; Peak Reflow Compatible (260 C):No; Sensor Housing:Rectangular; Contact Current Max:150mA; Contact Rating:150mA
MB90440G Octal D-Type Edge-Triggered Flip-Flops with 3-State Outputs 20-CDIP -55 to 125
MB90F482 16-bit Proprietary Microcontroller
相關代理商/技術參數
參數描述
MB90F443GPFR-GE1 制造商:FUJITSU 功能描述:
MB90F455PMCR-GE1 制造商:FUJITSU 功能描述:
MB90F455SPMCR-GE1 制造商:FUJITSU 功能描述:
MB90F455SPMCR-G-JNE1 制造商:FUJITSU 功能描述:
MB90F456PMCR-G 制造商:FUJITSU 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*