![](http://datasheet.mmic.net.cn/330000/MB90F362_datasheet_16437851/MB90F362_3.png)
MB90360 Series
3
(Continued)
Timer
Timebase timer, watch timer (device without S-suffix) , watchdog timer : 1 channel
8/16-bit PPG timer : 8-bit
×
2 channels or 16-bit
×
2 channels
16-bit reload timer : 2 channels
16- bit input/output timer
- 16-bit free run timer : 1 channel (FRT0 : ICU 0/1/2/3)
- 16- bit input capture : (ICU) : 4 channels
Full-CAN interface : up to 1 channel
Compliant with Ver 2.0A and Ver 2.0B CAN specifications
Flexible message buffering (mailbox and FIFO buffering can be mixed)
CAN wake-up function
UART (LIN/SCI) : up to 2 channels
Equipped with full-duplex double buffer
Clock-asynchronous or clock-synchronous serial transmission is available
DTP/External interrupt : up to 8 channels, CAN wakeup : up to 1 channel
Module for activation of expanded intelligent I/O service (EI
2
OS) and generation of external interrupt by external
input.
Delay interrupt generator module
Generates interrupt request for task switching.
8/10-bit A/D converter : 16 channels
Resolution is selectable between 8-bit and 10-bit.
Activation by external trigger input is allowed.
Conversion time : 3
μ
s (at 24-MHz machine clock, including sampling time)
Program patch function
Address matching detection for 6 address pointers.
Low voltage/CPU operation detection reset (devices with T-suffix)
Detects low voltage (4.0 V
±
0.3 V) and resets automatically
Resets automatically when program is runaway and counter is not cleared within interval time
(approx. 262 ms : external 4 MHz)
Capable of changing input voltage for port
Automotive/CMOS-Schmitt (initial level is Automotive in single-chip mode)
FLASH memory security function
Protects the content of FLASH memory (FLASH memory device only)