參數資料
型號： MB90F347CSPF
廠商： FUJITSU LTD
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
封裝： PLASTIC, QFP-100
文件頁數： 18/76頁
文件大?。?/td> 1033K
代理商： MB90F347CSPF
MB90340 Series
25
11. Notes on Energization
To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during energization at 50
or more
s (0.2 V to 2.7 V)
12. Stabilization of power supply voltage
A sudden change in the supply voltage may cause the device to malfunction even within the specified VCC supply
voltage operating range. Therefore, the VCC supply voltage should be stabilized.
For reference, the supply voltage should be controlled so that VCC ripple variations (peak-to-peak value) at
commercial frequencies (50 Hz to 60 Hz) fall below 10
% of the standard VCC supply voltage and the coefficient
of fluctuation does not exceed 0.1 V/ms at instantaneous power switching.
13. Initialization
In the device, there are internal registers which are initialized only by a power-on reset. To initialize these registers,
turn on the power again.
14. Port 0 to port 3 output during Power-on (External-bus mode)
As shown below, when power is turned on in External-Bus mode, there is a possibility that output signal of
Port 0 to Port 3 might be unstable.
15. Notes on using CAN Function
To use CAN function, please set ’1’ to DIRECT bit of CAN Direct Mode Register (CDMR).
If DIRECT bit is set to ’0’ (initial value), wait states will be performed when accessing CAN registers.
Please refer to Hardware Manual of MB90340 series for detail of CAN Direct Mode Register.
16. Flash security Function (except for MB90F346)
The security bit is located in the area of the flash memory.
If protection code 01H is written in the security bit, the flash memory is in the protected state by security.
Therefore please do not write 01H in this address if you do not use the security function.
Please refer to following table for the address of the security bit.
Flash memory size
Address for security bit
MB90F347
Embedded 1 Mbit Flash Memory
FE0001H
MB90F342
MB90F349
Embedded 2 Mbit Flash Memory
FC0001H
MB90F343
Embedded 3 Mbit Flash Memory
F90001H
MB90F345
Embedded 4 Mbit Flash Memory
F80001H
V 5
DD
V 3
Port0 to Port3
Port0 to 3 outputs
might be unstable
Port0 to 3 outputs = Hi-Z
相關PDF資料
PDF描述
MB90F347PFV 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
MB90347CSPFV 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP100
MB90F347CPFV 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
MB90346CPF 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP100
MB90F346PFV 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
MB90F349ASPFV-GSE1 制造商:FUJITSU 功能描述:
MB90F349ASPMC-GSE1 制造商:FUJITSU 功能描述:
MB90F349CAPFR-GSE1 制造商:FUJITSU 功能描述:
MB90F349CASPFR-GSE1 制造商:FUJITSU 功能描述:
MB90F349CASPFV-GSE1 制造商:FUJITSU 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*