![](http://datasheet.mmic.net.cn/330000/MB90F654A_datasheet_16438029/MB90F654A_3.png)
3
MB90650A Series
I
PRODUCT LINEUP
Notes: MB90V650A device is assured only when operate with the tools, under the condition of power supply
voltage: 2.7 V to 3.3 V, operating temparature: 0
°
C to 70
°
C and operating frequency: 1.5 MHz to 8MHz
For more information about each package, see seciton “PACKAGE DIMENSIONS”.
MB90652A
MB90P653A
MB90V650A
MB90654A
MB90F654A
Classification
Mask ROM product
OTPROM product
For evaluation
Mask ROM
product
FLASH product
ROM size
RAM size
Power supply
voltage
CPU functions
64 Kbytes
3 Kbytes
128 Kbytes
—
256 Kbytes
8 Kbytes
5 Kbytes
2.2 V to 3.6 V
2.7 V to 5.5 V
2.2 V to 3.6 V
2.4 V to 3.6 V
The number of instructions:
Instruction bit length:
Instruction length:
Data bit length:
Minimum execution time:
Interrupt processing time:
I/O ports (N-channel open-drain):
I/O ports (CMOS):
340
8/16 bits
1 to 7 bytes
1/4/8/16/32 bits
62.5 ns/4 MHz (PLL multiplier = 4)
1.0
μ
s/16 MHz (minimum)
4
75 (Input pull-up resistors available: 24/
Can be set as N-channel open-drain: 8)
79
Analog inputs: 8 channels
10-bit resolution
Conversion time : minimum 12.25
μ
s/8 MHz
2 channels (independent),
8-bit resolution, R-2R type
16 bits
×
1 channel/8 bits
×
2 channels selectable
Includes reload and compare functions.
1 channel
Master mode/slave mode available
1 channel
Clock synchronous communication
Clock asynchronous communication
8 bits
×
2 channels
LSB-first or MSB-first operation selecable
8 bits
×
2 channels/16 bits
×
1 channel selectable
1 channel
(Input capture
×
2 channels, output compare
×
4 channels, and free-run timer
×
1 channel)
Ports
Total:
A/D converter
Analog inputs : 8 channels
10-bit resolution
Conversion time : minimum
6.13
μ
s/16 MHz
Analog inputs : 8 channels
10-bit resolution
Conversion time : minimum
6.13
μ
s/16 MHz
D/A converter
8/16-bit up/down
counter/timer
I
2
C interface
UART
I/O extended serial
interface
8/16-bit PPG
16-bit I/O timer
DTP/external
interrupt
Timer functions
DTMF generator
8 inputs
Timebase timer (18-bit)/watchdog timer (18-bit)/watch timer (15-bit)
Supports every ITU-T (CCITT) tone for output (Internal 16 MHz shall be used for
DTMF generator).
CPU intermittent operation mode, sub clock mode, stop mode, sleep mode,
watch mode, pseudo-watch mode
Selectable multiplier: 1/2/3/4
(Set a multiplier that does not exceed the assured operation frequency range.)
V
PP
is shared with
the MD2 pin
(for EPROM
programming)
FPT-100P-M05, FPT-100P-M06
Low-power
consumption modes
PLL function
Other
—
—
Package
PGA-256C-A02
FPT-100P-M05, FPT-100P-M06
MB90653A
Item
Part number