參數資料
      型號: MB90427GA
      廠商: Fujitsu Limited
      英文描述: 16-Bit Original Microcontroller
      中文描述: 16位微控制器原件
      文件頁數: 78/99頁
      文件大小: 1706K
      代理商: MB90427GA
      MB90420G/5G (A) Series
      78
      I
      INSTRUCTIONS (351 INSTRUCTIONS)
      Table 1 Explanation of Items in Tables of Instructions
      Number of execution cycles
      The number of cycles required for instruction execution is acquired by adding the number of cycles for each
      instruction, a corrective value depending on the condition, and the number of cycles required for program fetch.
      Whenever the instruction being executed exceeds the two-byte (word) boundary, a program on an internal
      ROM connected to a 16-bit bus is fetched. If data access is interfered with, therefore, the number of execution
      cycles is increased.
      For each byte of the instruction being executed, a program on a memory connected to an 8-bit external data
      bus is fetched. If data access in interfered with, therefore, the number of execution cycles is increased.
      When a general-purpose register, an internal ROM, an internal RAM, an internal I/O device, or an external
      bus is accessed during intermittent CPU operation, the CPU clock is suspended by the number of cycles
      specified by the CG1/0 bit of the low-power consumption mode control register. When determining the number
      of cycles required for instruction execution during intermittent CPU operation, therefore, add the value of the
      number of times access is done
      ×
      the number of cycles suspended as the corrective value to the number of
      ordinary execution cycles.
      Item
      Meaning
      Mnemonic
      Upper-case letters and symbols: Represented as they appear in assembler.
      Lower-case letters:
      Replaced when described in assembler.
      Numbers after lower-case letters:Indicate the bit width within the instruction code.
      Indicates the number of bytes.
      Indicates the number of cycles.
      m: When branching
      n : When not branching
      See Table 4 for details about meanings of other letters in items.
      Indicates the number of accesses to the register during execution of the instruction.
      It is used calculate a correction value for intermittent operation of CPU.
      Indicates the correction value for calculating the number of actual cycles during execution of the
      instruction. (Table 5)
      The number of actual cycles during execution of the instruction is the correction value summed
      with the value in the “~” column.
      Indicates the operation of instruction.
      Indicates special operations involving the upper 8 bits of the lower 16 bits of the accumulator.
      Z : Transfers “0”.
      X : Extends with a sign before transferring.
      – : Transfers nothing.
      Indicates special operations involving the upper 16 bits in the accumulator.
      * : Transfers from AL to AH.
      – : No transfer.
      Z : Transfers 00
      H
      to AH.
      X : Transfers 00
      H
      or FF
      H
      to AH by signing and extending AL.
      Indicates the status of each of the following flags: I (interrupt enable), S (stack), T (sticky bit),
      N (negative), Z (zero), V (overflow), and C (carry).
      * : Changes due to execution of instruction.
      – : No change.
      S : Set by execution of instruction.
      R : Reset by execution of instruction.
      #
      ~
      RG
      B
      Operation
      LH
      AH
      I
      S
      T
      N
      Z
      V
      C
      RMW
      Indicates whether the instruction is a read-modify-write instruction. (a single instruction that
      reads data from memory, etc., processes the data, and then writes the result to memory.)
      * : Instruction is a read-modify-write instruction.
      – : Instruction is not a read-modify-write instruction.
      Note: A read-modify-write instruction cannot be used on addresses that have different
      meanings depending on whether they are read or written.
      相關PDF資料
      PDF描述
      MB90427GAPF 16-Bit Original Microcontroller
      MB90427GAPFV 16-Bit Original Microcontroller
      MB90427GPF 16-Bit Original Microcontroller
      MB90427GPFV 16-Bit Original Microcontroller
      MB90428GPF 16-Bit Original Microcontroller
      相關代理商/技術參數
      參數描述
      MB90427GAPF 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller
      MB90427GAPFV 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller
      MB90427GAPMC 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller
      MB90427GC 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller
      MB90427GCPF 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller