- 您現在的位置：買賣IC網 > PDF目錄377878 > MB15F02SLPFV1 (FUJITSU LTD) Dual Serial Input PLL Frequency Synthesizer PDF資料下載
參數資料
| 型號： | MB15F02SLPFV1 |
| 廠商： | FUJITSU LTD |
| 元件分類： | XO, clock |
| 英文描述： | Dual Serial Input PLL Frequency Synthesizer |
| 中文描述： | PLL FREQUENCY SYNTHESIZER, 1200 MHz, PDSO16 |
| 封裝： | PLASTIC, SSOP-16 |
| 文件頁數： | 11/25頁 |
| 文件大?。?/td> | 228K |
| 代理商： | MB15F02SLPFV1 |
11
MB15F02SL
Table 9. Charge Pump Current Setting
Power Saving Mode (Intermittent Mode Control Circuit)
Table 10. PS Pin Setting
The intermittent mode control circuit reduces the PLL power consumption.
By setting the PS pin low, the device enters into the power saving mode, reducing the current consumption. See
the Electrical Characteristics chart for the specific value.
The phase detector output, Do, becomes high impedance.
For the dual PLL, the lock detector, LD, is as shown in the LD Output Logic table.
Setting the PS pin high, releases the power saving mode, and the device works normally.
The intermittent mode control circuit also ensures a smooth startup when the device returns to normal operation.
When the PLL is returned to normal operation, the phase comparator output signal is unpredictable. This is because
of the unknown relationship between the comparison frequency (fp) and the reference frequency (fr) which can
cause a major change in the comparator output, resulting in a VCO frequency jump and an increase in lockup time.
To prevent a major VCO frequency jump, the intermittent mode control circuit limits the magnitude of the error signal
from the phase detector when it returns to normal operation.
Note:
When power (V
CC
) is first applied, the device must be in standby mode, PS = Low, for at least 1
μ
s.
PS pin must be set at “L” for Power-ON.
CS
Current value
±
6.0 mA
±
1.5 mA
H
L
PS pin
Status
H
Normal mode
L
Power saving mode
(1)
(2)
(3)
V
CC
Clock
Data
LE
PS
ON
tv
≥
1
μ
s
tps
≥
100 ns
OFF
(1) PS =
“
L
”
(power saving mode) at Power-ON
(2) Set serial data
1
μ
s
later after power supply remains stable (V
CC
>
2.2 V).
(3) Release power saving mode (PS:
“
L
”
→
“
H
”
) 100 ns later after setting serial data.
相關PDF資料 |
PDF描述 |
|---|---|
| MB15F02 | Dual Serial Input PLL Frequency Synthesizer |
| MB15F02PFV | Dual Serial Input PLL Frequency Synthesizer |
| MB15F02PV | Dual Serial Input PLL Frequency Synthesizer |
| MB15F02SL | Dual Serial Input PLL Frequency Synthesizer |
| MB15F02SLPV1 | Dual Serial Input PLL Frequency Synthesizer |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MB15F02SLPV1 | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Dual Serial Input PLL Frequency Synthesizer |
| MB15F03 | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Dual Serial Input PLL Frequency Synthesizer |
| MB15F03L | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Dual Serial Input PLL Frequency Synthesizer |
| MB15F03LPFV | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Dual Serial Input PLL Frequency Synthesizer |
| MB15F03LPV | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Dual Serial Input PLL Frequency Synthesizer |
發布緊急采購，3分鐘左右您將得到回復。