- 您現在的位置：買賣IC網 > PDF目錄2092 > MAX98502EWE+T (Maxim Integrated Products)IC AMP AUD 2.2W BOOST D 16WLP PDF資料下載
參數資料
| 型號： | MAX98502EWE+T |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 5/15頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC AMP AUD 2.2W BOOST D 16WLP |
| 標準包裝： | 2,500 |
| 類型： | D 類 |
| 輸出類型： | 1-通道（單聲道） |
| 在某負載時最大輸出功率 x 通道數量： | 4.1W x 1 @ 4 歐姆 |
| 電源電壓： | 2.5 V ~ 5.5 V |
| 特點： | 消除爆音，差分輸入，關閉 |
| 安裝類型： | * |
| 供應商設備封裝： | * |
| 封裝/外殼： | * |
| 包裝： | * |
______________________________________________________________________________________ 13
MAX98502
Boosted 2.2W Class D Amplifier
with Automatic Level Control
Supply Bypassing, Layout, and Grounding
Proper layout and grounding are essential for optimum
performance. Use a large continuous ground plane on
a dedicated layer of the PCB to minimize loop areas.
Connect AGND and BSTPGND/SPKPGND directly to the
ground plane using the shortest traces length possible.
Proper grounding improves audio performance, and
prevents any digital noise from coupling into the analog
audio signals.
Bypass VBAT with a 10FF capacitor and a system
bulk capacitance of 22FF or larger. Bypass PVDD to
SPKPGND with a 0.1FF capacitor and with as minimal a
loop area as possible. Connect SPKP and SPKN to the
speaker using the shortest and widest traces possible.
Reducing trace length minimizes radiated EMI. Route
SPKP/SPKN as a differential pair on the PCB to minimize
loop area, thereby, the inductance of the circuit. If filter
components are used on the speaker outputs, be sure
to locate them as close as possible to the MAX98502 to
ensure maximum effectiveness. Minimize the trace length
from any ground-tied passive components to SPKPGND
to further minimize radiated EMI.
An evaluation kit (MAX98502 Evaluation Kit) is available
to provide an example layout for the MAX98502.
WLP Applications Information
For the latest application details on WLP construction,
dimensions, tape carrier information, PCB techniques,
bump-pad layout, and recommended reflow tempera-
ture profile, as well as the latest information on reliability
testing results, refer to the Application Note 1891: Wafer-
Level Packaging (WLP) and Its Applications on Maxim’s
website at www.maxim-ic.com/ucsp. See Figure 4 for the
recommended PCB footprint for the MAX98502.
Figure 4. Recommended PCB Footprint
Typical Application Circuit
0.25mm
0.22mm
CONTROL
DIFFERENTIAL
INPUT
BOOST CONVERTER
GAIN
OUTPUT
STAGE
BATTERY
SPKP
SPKN
PVDD
8I
VCCOUT
LX
VBAT
22F*
27.4kI
1%
CIN
1F
CIN
1F
*SYSTEM LEVEL REQUIREMENT
AGND
SPKPGND
BSTPGND
C4
A4
D1, C2
D3
RKNEE B3
GAIN B2
SDSPK C3
SDBST D4
B4
A3
A2
A1
B1
C1
CVBAT
10F
0805
10%
2.2H
20%
INP D2
INN
MAX98502
CVCCOUT
22F
0805
10%
0.1F
10%
相關PDF資料 |
PDF描述 |
|---|---|
| MAX9850ETI+G47 | IC AMP AUDIO HDPHN STER 28WQFN |
| MAX985EBT-T | IC COMPARATOR R-R 6-UCSP |
| MAX9875ERP+T | IC AUDIO SUBSYSTEM 20UCSP |
| MAX9877AERP+T | IC SUBSYSTEM MONO AUD 20MAXFILM |
| MAX9877EWP+TG45 | IC AUDIO SUBSYSTEM 20-WLP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MAX98504EVKIT# | 制造商:Maxim Integrated Products 功能描述:KIT FOR CLASS D SPEAKER MAX98504 |
| MAX98504EWV+T | 制造商:Maxim Integrated Products 功能描述:BOOSTED CLASS D AMPLIFIER WITH I/V SENSE - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC AUDIO AMP CLASS D |
| MAX9850ETI | 制造商:Maxim Integrated Products 功能描述:STEREO AUDIO DAC WITH DIRECTDRIVE HEADPHONE A - Bulk |
| MAX9850ETI+ | 功能描述:音頻數/模轉換器 IC Stereo Audio DAC w/DirectDrive Amp RoHS:否 制造商:Texas Instruments 轉換器數量: 分辨率:16 bit 接口類型:I2S, UBS 轉換速率: 信噪比:98 dB 工作電源電壓:5 V DAC 輸出端數量:2 工作溫度范圍:- 25 C to + 85 C 電源電流:23 mA 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-32 封裝:Reel |
| MAX9850ETI+G47 | 功能描述:音頻數/模轉換器 IC Stereo Audio DAC w/DirectDrive Amp RoHS:否 制造商:Texas Instruments 轉換器數量: 分辨率:16 bit 接口類型:I2S, UBS 轉換速率: 信噪比:98 dB 工作電源電壓:5 V DAC 輸出端數量:2 工作溫度范圍:- 25 C to + 85 C 電源電流:23 mA 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-32 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。