- 您現在的位置：買賣IC網 > PDF目錄380436 > MAX7314ATG (MAXIM INTEGRATED PRODUCTS INC) 18-Port GPIO with LED Intensity Control, Interrupt, and Hot-Insertion Protection PDF資料下載
參數資料
| 型號： | MAX7314ATG |
| 廠商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分類： | 微控制器/微處理器 |
| 英文描述： | 18-Port GPIO with LED Intensity Control, Interrupt, and Hot-Insertion Protection |
| 中文描述： | 16 I/O, PIA-GENERAL PURPOSE, QCC24 |
| 封裝： | 4 X 4 MM, 0.80 MM HEIGHT, MO-220WGGD2, TQFN-24 |
| 文件頁數： | 1/25頁 |
| 文件大?。?/td> | 402K |
| 代理商： | MAX7314ATG |
General Description
The MAX7314 I
2
C-compatible serial interfaced periph-
eral provides microprocessors with 16 I/O ports plus one
output-only port and one input-only port. Each I/O port
can be individually configured as either an open-drain
current-sinking output rated at 50mA and 5.5V, or a logic
input with transition detection. The output-only port can
be assigned as an interrupt output for transition detec-
tion. The outputs are capable of driving LEDs, or provid-
ing logic outputs with external resistive pullup up to 5.5V.
Eight-bit PWM current control is built in for all 17 output
ports. A 4-bit global control applies to all LED outputs
and provides coarse adjustment of current from fully off
to fully on with 14 intensity steps in between. Each out-
put has an individual 4-bit control, which further divides
the globally set current into 16 more steps.
Alternatively, the current control can be configured as a
single 8-bit control that sets all outputs at once.
Each output has independent blink timing with two blink
phases. All LEDs can be individually set to be on or off
during either blink phase, or to ignore the blink control.
The blink period is controlled by a clock input (up to 1kHz)
on BLINK or by a register. The BLINK input can also be
used as a logic control to turn the LEDs on and off, or as a
general-purpose input.
The MAX7314 supports hot insertion. All port pins, the
INT
output, SDA, SCL,
RST
, BLINK, and the slave
address input ADO remain high impedance in power-
down (V+ = 0V) with up to 6V asserted upon them.
The MAX7314 is controlled through a 2-wire serial inter-
face, and uses four-level logic to allow four I
2
C
addresses from only one select pin.
Applications
LCD Backlights
LED Status Indication
Relay Drivers
Keypad Backlights
RGB LED Drivers
System I/O Ports
Features
400kbps, 2-Wire Serial Interface, 5.5V Tolerant
2V to 3.6V Operation
Overall 8-Bit PWM LED Intensity Control
Global 16-Step Intensity Control
Individual 16-Step Intensity Controls
2-Phase LED Blinking
50mA Maximum Port Output Current
Supports Hot Insertion
Outputs are 5.5V-Rated Open Drain
Inputs are Overvoltage Protected to 5.5V
Transition Detection with Interrupt Output
1.2μA (typ), 3.6μA (max) Operating Current
Small 4mm x 4mm, Thin QFN Package
-40°C to +125°C Temperature Range
M
18-Port GPIO with LED Intensity Control,
Interrupt, and Hot-Insertion Protection
________________________________________________________________
Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX7314
P8
P9
P10
P11
P12
P13
P14
P15
P0
P1
P2
P3
P4
P5
P6
P7
V+
3.3V
μ
C
SDA
SCL
I/O
I/O
INT
SDA
SCL
BLINK
RST
INT/O16
AD0
3.3V
5V
OUTPUT
OUTPUT
GND
5V
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
0.047
μ
F
Typical Application Circuit
19-3170; Rev 4; 4/05
Ordering Information
PART
TEMP RANGE
PIN-
PACKAGE
PKG
CODE
MAX7314ATG
-40
°
C to +125
°
C
24 Thin QFN
4mm x 4mm
x 0.8mm
24 QSOP
T2444-4
MAX7314AEG
-40
°
C to +125
°
C
—
Pin Configurations continued at end of data sheet.
I
2
C is a trademark of Philips Corp.
Purchase of I
2
C components from Maxim Integrated Products,
Inc., or one of its sublicensed Associated Companies, conveys a
license under the Philips I
2
C Patent Rights to use these compo-
nents in an I
2
C system, provided that the system conforms to the
I
2
C Standard Specification as defined by Philips.
相關PDF資料 |
PDF描述 |
|---|---|
| MAX7314AEG | 18-Port GPIO with LED Intensity Control, Interrupt, and Hot-Insertion Protection |
| MAX7382CRUK | Silicon Oscillator with Reset Output |
| MAX7382 | Silicon Oscillator with Reset Output |
| MAX7382CMUK | Silicon Oscillator with Reset Output |
| MAX7382CMUT | Silicon Oscillator with Reset Output |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MAX7314ATG+ | 功能描述:外圍驅動器與原件 - PCI 18-Port GPIO RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray |
| MAX7314ATG+T | 功能描述:接口-I/O擴展器 18-Port GPIO RoHS:否 制造商:NXP Semiconductors 邏輯系列: 輸入/輸出端數量: 最大工作頻率:100 kHz 工作電源電壓:1.65 V to 5.5 V 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:HVQFN-16 封裝:Reel |
| MAX7314ATG-T | 功能描述:外圍驅動器與原件 - PCI RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray |
| MAX7314EVKIT+ | 功能描述:外圍驅動器與原件 - PCI Evaluation Kit for the MAX7314 RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray |
| MAX7315 | 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:8-Port I/O Expander with LED Intensity Control and Interrupt |
發布緊急采購，3分鐘左右您將得到回復。