參數資料
型號: MAX6702MKA+T
廠商: MAXIM INTEGRATED PRODUCTS INC
元件分類: 電源管理
英文描述: Low-Voltage, SOT23, µP Supervisors with Power-Fail In/Out, Manual Reset, and Watchdog Timer
中文描述: 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8
封裝: MO176BA, ROHS COMPLIANT, SOT-23, 8 PIN
文件頁數: 26/30頁
文件大小: 1191K
代理商: MAX6702MKA+T
MAX6701–08/MAX6701A–03A/05A–07A
Low-Voltage, SOT23 P Supervisors with Power-
Fail In/Out, Manual Reset, and Watchdog Timer
_______________________________________________________________________________________
5
Pin Description
PIN
MAX6701(A)
MAX6702(A)
MAX6703(A)
MAX6704
MAX6705(A)
MAX6706(A)
MAX6707(A)
MAX6708
NAME
FUNCTION
11
1
MR
Active-Low, Manual Reset Input, Internal 50k
Pullup to VCC.
Pull low to force a reset. Reset remains active as long as MR is
low and the reset timeout period after MR goes high. Leave
unconnected or connect to VCC if unused. WDO deasserts
when MR is low (MAX6701(A)/MAX6702(A)/MAX6703(A)/
MAX6705(A)/ MAX6706(A)/MAX6707(A) only).
22
2
VCC
Supply Voltage for MAX6701–MAX6708 and Input for Primary
Reset Threshold Monitor. Push-pull outputs are powered by VCC
.
3
GND
Ground
4
PFI
Power-Fail Voltage Monitor Input. High-impedance input for
internal power-fail comparator. Connect this pin to an external
resistive-divider network to set the reset threshold voltage;
0.62V (typ) threshold. Connect to GND or VCC when not used.
55
5
PFO
Power-Fail Monitor Output. Open drain or push-pull active low.
PFO goes low when PFI is less than 0.62V.
66
6
WDI
Watchdog Input. If WDI remains high or low for longer than the
watchdog timeout period, the internal watchdog timer runs out and
WDO is asserted. WDO is asserted low after each watchdog
overflow and remains low until the watchdog timer is cleared (the
reset output is not affected). The internal watchdog timer clears
whenever a VCC/RST_IN1/RST_IN2 reset is asserted, the manual
reset is asserted, or WDI sees a rising or falling edge. The
watchdog timer remains cleared until the reset output is
deasserted. On the MAX6704, RESET pulse asserts for the reset
timeout period after each watchdog timeout overflow. The
watchdog timer cannot be disabled.
——
6
N.C.
No Connection. Not internally connected.
77
7
RESET
Active-Low Reset Output (Open Drain or Push-Pull). RESET
changes from high to low when the VCC input drops below the
selected reset threshold (or RST_IN1/ RST_IN2 for the
MAX6701(A)/MAX6702(A)/MAX6703(A), MR is pulled low, or the
watchdog triggers a reset (MAX6704 only). RESET remains low for
the reset timeout period after the reset conditions are terminated.
相關PDF資料
PDF描述
MAX6702RKA+T Low-Voltage, SOT23, µP Supervisors with Power-Fail In/Out, Manual Reset, and Watchdog Timer
MAX6702SKA+T Low-Voltage, SOT23, µP Supervisors with Power-Fail In/Out, Manual Reset, and Watchdog Timer
MAX6702TKA+T Low-Voltage, SOT23, µP Supervisors with Power-Fail In/Out, Manual Reset, and Watchdog Timer
MAX6702YKA+T Low-Voltage, SOT23, µP Supervisors with Power-Fail In/Out, Manual Reset, and Watchdog Timer
MAX6702ZKA+T Low-Voltage, SOT23, µP Supervisors with Power-Fail In/Out, Manual Reset, and Watchdog Timer
相關代理商/技術參數
參數描述
MAX6702RKA 制造商:Maxim Integrated Products 功能描述:LOW-VOLTAGE SOT23 UP SUPERVISOR WI - Rail/Tube
MAX6702RKA+ 制造商:Maxim Integrated Products 功能描述:PROCESSOR SUPERVISOR 2.63V/ADJV/ADJV 12UA 8PIN SOT-23 - Rail/Tube
MAX6702RKA+T 功能描述:監控電路 Triple uPower Supervisor RoHS:否 制造商:STMicroelectronics 監測電壓數: 監測電壓: 欠電壓閾值: 過電壓閾值: 輸出類型:Active Low, Open Drain 人工復位:Resettable 監視器:No Watchdog 電池備用開關:No Backup 上電復位延遲(典型值):10 s 電源電壓-最大:5.5 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:UDFN-6 封裝:Reel
MAX6702RKA-T 功能描述:監控電路 RoHS:否 制造商:STMicroelectronics 監測電壓數: 監測電壓: 欠電壓閾值: 過電壓閾值: 輸出類型:Active Low, Open Drain 人工復位:Resettable 監視器:No Watchdog 電池備用開關:No Backup 上電復位延遲(典型值):10 s 電源電壓-最大:5.5 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:UDFN-6 封裝:Reel
MAX6702SKA 制造商:Maxim Integrated Products 功能描述:LOW-VOLTAGE SOT23 UP SUPERVISOR WI - Rail/Tube