- 您現在的位置：買賣IC網 > PDF目錄5547 > MAX4460ESA+T (Maxim Integrated Products)IC INSTR AMP SGL R-R 8-SOIC PDF資料下載
參數資料
| 型號： | MAX4460ESA+T |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 7/20頁 |
| 文件大小： | 0K |
| 描述： | IC INSTR AMP SGL R-R 8-SOIC |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 2,500 |
| 放大器類型： | 儀表 |
| 電路數： | 1 |
| 輸出類型： | 滿擺幅 |
| 轉換速率： | 0.5 V/µs |
| 增益帶寬積： | 2.5MHz |
| 電流 - 輸入偏壓： | 1pA |
| 電壓 - 輸入偏移： | 50µV |
| 電流 - 電源： | 800µA |
| 電流 - 輸出 / 通道： | 150mA |
| 電壓 - 電源，單路/雙路(±)： | 2.85 V ~ 5.25 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 8-SOIC（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 8-SOIC |
| 包裝： | 帶卷 (TR) |
MAX4460/MAX4461/MAX4462
SOT23, 3V/5V, Single-Supply, Rail-to-Rail
Instrumentation Amplifiers
______________________________________________________________________________________
15
The rotational nature of gain error, and the fact that it is
pivoted around point E in Figure 5, shows that gain-
error contribution to the total output voltage error is
directly proportional to the input voltage. At zero input
voltage, the error contribution of gain error is zero, i.e.,
the total deviation from the origin (the expected zero
output value) is only due to end-points OE and nonlin-
earity error at zero value of input (segment EZ on the
vertical axis).
The nonlinearity is the maximum deviation from a
straight line, and the end-point nonlinearity is the devia-
tion from the end-point line. As shown in Figure 5, it is
likely that two nonlinearities are encountered, one posi-
tive and the other a negative nonlinearity error, shown
as NL+ and NL- in Figure 5.
Generally, NL+ and NL- have different values and this
remains the case if the device is calibrated (trimmed)
for end-points errors (which means changing the gain
of the instrumentation amplifier in such a way that the
slope of line AB becomes equal to that of CD, and the
offset becomes trimmed such that OE vanishes to
zero). This is an undesirable situation when nonlinearity
is of prime interest.
The straight line shown in Figure 6 is in parallel to end-
points line AB and has a Y intercept of OS on the verti-
cal axis. This line is a shifted end-points line such that
the positive and negative nonlinearity errors with
respect to this line are equal. For this reason, the line is
called the best straight line (BSL). Maxim internally
trims the MAX4460/MAX4461/MAX4462 with respect to
this line (changing the gain slope to be as close as
possible to the slope of the ideal line and trimming the
offset such that OS gets as close to the origin as possi-
ble) to minimize all the errors. The total accuracy error
is still the summation of the gain error, nonlinearity, and
offset errors.
As an example, assume the following specification for
an instrumentation amplifier:
Gain = 10
GE = 0.15%
Offset (BSL) = 250V
NL = 0.05%
VDIF (input) = -100mV to +100mV
What is the maximum total error associated with the
GE, offset (BSL), and NL? With a differential input range
of -0.1V to +0.1V and a gain of 10, the output voltage
assumes a range of -1V to +1V, i.e., a total full-scale
range of 2V.
The individual errors are as follows:
GE = (0.15%) (10) (100mV) = 1.5mV
Offset (BSL) = (250V) (10) = 2.5mV
NL = (0.05%) (2V) = 1mV
Maximum Total Error = 1.5mV + 2.5mV + 1mV
= 5mV
So, the absolute value of the output voltage, consider-
ing the above errors, would be at worst case between
0.995V to 1.005V. Note that other important parameters
such as PSRR, CMRR, and noise also contribute to the
total error in instrumentation applications. They are not
considered here.
VIN
VOUT
ACTUAL CURVE
END-POINT LINE
BSL LINE
NL+
NL-
0
E
Z
B
S
A
NL+ = NL- = NL
NLBSL (%) = (NL / FULL-SCALE OUTPUT RANGE) X 100
OFFSET (BSL) = OSL
GAIN AND OFFSET WILL BE FACTORY-TRIMMED FOR BEST STRAIGHT LINE
Figure 6. To Minimize Nonlinearity Error, the MAX4460/MAX4461/
MAX4462 are Internally Trimmed to Adjust Gain and Offset for the
Best Straight Line so NL- = NL+
相關PDF資料 |
PDF描述 |
|---|---|
| MAX4461TESA+T | IC INSTR AMP SGL R-R 8-SOIC |
| MAX4461UESA+T | IC INSTR AMP SGL R-R 8-SOIC |
| MU20-110/32DFK | CONN UNINSUL FMALE 26-20AWG .11" |
| MVU18-250DMFX | CONN TERM PIGGYBACK 22-18 AWG |
| 292178-1 | CONN MINI-DRAWER 22POS DL 2MM |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MAX4460ETT | 制造商:Maxim Integrated Products 功能描述:S0T23 3V/5V SINGLE-SUPPLY RAIL-T - Rail/Tube |
| MAX4460ETT+ | 制造商:Maxim Integrated Products 功能描述:SP AMP INSTR AMP SGL R-R O/P 5.25V 6TDFN EP - Rail/Tube |
| MAX4460ETT+T | 功能描述:儀表放大器 3V/5V Single-Supply Rail-Rail RoHS:否 制造商:Texas Instruments 通道數量: 輸入補償電壓:150 V 可用增益調整: 最大輸入電阻:10 kOhms 共模抑制比（最小值）:88 dB 工作電源電壓:2.7 V to 36 V 電源電流:200 uA 最大工作溫度:+ 125 C 最小工作溫度:- 40 C 封裝 / 箱體:MSOP-8 封裝:Bulk |
| MAX4460ETT-T | 功能描述:儀表放大器 RoHS:否 制造商:Texas Instruments 通道數量: 輸入補償電壓:150 V 可用增益調整: 最大輸入電阻:10 kOhms 共模抑制比（最小值）:88 dB 工作電源電壓:2.7 V to 36 V 電源電流:200 uA 最大工作溫度:+ 125 C 最小工作溫度:- 40 C 封裝 / 箱體:MSOP-8 封裝:Bulk |
| MAX4460EUT | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。