SPI/I2C UART with 128-Word FIFOs The XOFF1 and XOFF2 register contents define th" />
參數資料
型號： MAX3107EAG+
廠商： Maxim Integrated Products
文件頁數： 35/52頁
文件大小： 0K
描述： IC UART SPI/I2C 128 FIFO 24SSOP
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 58
特點： 內部振蕩器
通道數： 4，QUART
FIFO's： 128 字節
規程： RS232，RS485
電源電壓： 2.35 V ~ 3.6 V
帶自動流量控制功能： 是
帶IrDA 編碼器/解碼器： 是
帶故障啟動位檢測功能： 是
安裝類型： 表面貼裝
封裝/外殼： 24-SSOP（0.209"，5.30mm 寬）
供應商設備封裝： 24-SSOP
包裝： 管件
SPI/I2C UART with 128-Word FIFOs
The XOFF1 and XOFF2 register contents define the XOFF characters for auto XON/XOFF flow control and/or special
characters used in special character detection. See details in the FlowCtrl register description.
Bits 7–0: Bit[7:0]
These bits define the XOFF2 character if auto software flow control is enabled in FlowCntrl[7:4]. If double-char-
acter flow control is selected in FlowCntrl[7:4], these bits constitute the MSB of the XOFF character. If special
character detection is enabled in MODE2[4] and auto flow control is not enabled, these bits define a special
character. If both special character detection and auto flow control are enabled (MODE2[4] and FlowCntrl[3]),
these bits define a special character.
The four GPIOs can be configured as inputs or outputs and can be operated in push-pull or open-drain mode. The
reference clock has to be active for the GPIOs to work.
Bits 7–4: GP[3:0]OD
Set the GP[3:0]OD bits to 1 to configure open-drain output or input operation. If GP[3:0]OD are 0 (default), the
GPIO_are push-pull outputs, if configured as outputs in GPIOConfg[3:0]. If configured as inputs in GPIOConfg[3:0],
the GPIO_ are high-impedance inputs with weak pulldowns.
Bits 3–0: GP[3:0]Out
The GP[3:0]Out bits configure the GPIO_ to be inputs or outputs. Set the GP[3:0]Out bits high to configure the associ-
ated GPIO_ as outputs. The GP[3:0]Out bits which are set low, are configured to be inputs.
Bits 7–4: GPI[3:0]Dat
The GPI[3:0]Dat bits reflect the logic on GPIO_ when configured as inputs through GPIOConfg[3:0].
Bits 3–0: GPO[3:0]Dat
The GPO[3:0]Dat bits allows programming the logic state of the GPIO_, when these are configured as outputs through
GPIOConfg[3:0]. For open-drain operation, pullup resistors are needed on GPIO_.
XOFF2 Register
GPIOConfg—GPIO Configuration Register
GPIOData—GPIO Data Register
ADDRESS:
0x17
MODE:
R/W
BIT
7
6
5
4
3
2
1
0
NAME
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
RESET
0
ADDRESS:
0x18
MODE:
R/W
BIT
7
6
5
4
3
2
1
0
NAME
GP3OD
GP2OD
GP1OD
GP0OD
GP3Out
GP2Out
GP1Out
GP0Out
RESET
0
ADDRESS:
0x19
MODE:
R/W
BIT
7
6
5
4
3
2
1
0
NAME
GPI3Dat
GPI2Dat
GPI1Dat
GPI0Dat
GPO3Dat
GPO2Dat
GPO1Dat
GPO0Dat
RESET
0
40
Maxim Integrated
MAX3107
相關PDF資料
PDF描述
MAX3108EWA+T IC UART
MAX3109ETJ+ SEMICONDUCTOR OTHER
MAX310CPE IC VIDEO MULTIPLEXER 8X1 16DIP
MAX3110EENI+G36 IC UART SPI COMPAT 28-DIP
MAX3120CUA+ IC TXRX INFRARED IRDA 8-UMAX
相關代理商/技術參數
參數描述
MAX3107EAG+ 功能描述:UART 接口集成電路 SPI/I2C Compatible RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3107EAG+T 功能描述:UART 接口集成電路 SPI/I2C Compatible RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3107ETG/V+ 功能描述:UART 接口集成電路 UART RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3107ETG/V+T 功能描述:UART 接口集成電路 SPI/IC UART with 128-Word FIFOs and Internal Oscillator RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
MAX3107ETG+ 功能描述:UART 接口集成電路 SPI/I2C Compatible RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*