- 您現在的位置：買賣IC網 > PDF目錄1937 > MAX3050ASA+T (Maxim Integrated Products)IC TXRX CAN 2MBPS 8-SOIC PDF資料下載
參數資料
| 型號： | MAX3050ASA+T |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 2/12頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC TXRX CAN 2MBPS 8-SOIC |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 2,500 |
| 類型： | 收發器 |
| 驅動器/接收器數： | 1/1 |
| 規程： | CAN |
| 電源電壓： | 4.5 V ~ 5.5 V |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 8-SOIC（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 8-SOIC |
| 包裝： | 帶卷 (TR) |
MAX3050/MAX3057
AutoShutdown (MAX3050)
To manage power consumption, AutoShutdown puts
the device into shutdown mode after the device has
been inactive for a period of time. The value of an
external capacitor (CSHDN) connected to SHDN deter-
mines the threshold of inactivity time, after which the
AutoShutdown triggers. Floating SHDN allows the
MAX3050 to automatically change from active mode to
shutdown.
Use a 100nF capacitor as C SHDN for a typical thresh-
old of 20ms. Change the capacitor value according to
the following equation to change the threshold time
period.
VSHDN is the threshold of SHDN guaranteed to be less
than 2V in the Electrical Characteristics table. Drive
SHDN high to turn the MAX3050 on and disable
AutoShutdown.
When the MAX3050 is in shutdown mode, only the
wake-up comparator is active, and normal bus commu-
nication is ignored. The remote master of the CAN sys-
tem wakes up the MAX3050 with a signal greater than
9V on CANH. Internal circuitry in the MAX3050 puts the
device in normal operation by driving SHDN high.
The MAX3057 does not have the AutoShutdown feature.
Driver Output Protection
The MAX3050/MAX3057 have several features that pro-
tect them from damage. Thermal shutdown switches off
the device and puts CANH and CANL into high imped-
ance if the junction temperature exceeds +160°C.
Thermal protection is needed particularly when a bus
line is short circuited. The hysteresis for the thermal
shutdown is approximately 20°C.
Additionally, a current-limiting circuit protects the trans-
mitter output stage against short-circuits to positive and
negative battery voltage. Although the power dissipa-
tion increases during this fault condition, this feature
prevents destruction of the transmitter output stage.
CnF
time s
VV
CC
SHDN()
.(
)
=
×
()
002
SHDN
±80V Fault-Protected, 2Mbps, Low Supply
Current CAN Transceivers
10
______________________________________________________________________________________
FFT
500mV/div
CANH - CANL
1V/div
Figure 5. FFT Dominant Bus at 2Mbps
FFT
200mV/div
CANH - CANL
1V/div
Figure 6. FFT Recessive Bus at 2Mbps
FFT
500mV/div
CANH - CANL
1V/div
Figure 7. FFT Dominant Bus at 500kbps
相關PDF資料 |
PDF描述 |
|---|---|
| MAX3051ESA+T | IC TXRX CAN 1MBPS 8-SOIC |
| MAX3053ESA+T | IC TXRX CAN 2MBPS 8-SOIC |
| MAX3055ASD+T | IC TXRX CAN FP 14-SOIC |
| MAX3059ASA | IC TXRX CAN 1MBPS 8-SOIC |
| MAX3060EEKA#TG16 | IC TXRX RS485/422 20MBPS SOT23-8 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MAX3051EKA | 制造商:Maxim Integrated Products 功能描述:+3.3V 1MBPS LOW-SUPPLY-CURRENT CA - Rail/Tube |
| MAX3051EKA+ | 制造商:Maxim Integrated Products 功能描述:+3.3V 1MBPS LOW-SUPPLY-CURRENT CA - Rail/Tube |
| MAX3051EKA+T | 功能描述:CAN 接口集成電路 3.3V 1Mbps Transceiver RoHS:否 制造商:Texas Instruments 類型:Transceivers 工作電源電壓:5 V 電源電流: 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:SOIC-8 封裝:Tube |
| MAX3051EKA-T | 功能描述:CAN 接口集成電路 RoHS:否 制造商:Texas Instruments 類型:Transceivers 工作電源電壓:5 V 電源電流: 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:SOIC-8 封裝:Tube |
| MAX3051ESA | 功能描述:CAN 接口集成電路 RoHS:否 制造商:Texas Instruments 類型:Transceivers 工作電源電壓:5 V 電源電流: 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:SOIC-8 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。