參數資料
型號: MAX1459
廠商: Maxim Integrated Products, Inc.
英文描述: 2-Wire, 4-20mA Smart Signal Conditioner
中文描述: 2線、4-20mA智能信號調理器
文件頁數: 21/24頁
文件大小: 243K
代理商: MAX1459
2)
MAX1459 Reference Manual,
which describes in
detail the architecture and functionality of the
MAX1459. This manual was developed for test engi-
neers familiar with data acquisition of sensor data
and provides sensor compensation algorithms and
test procedures.
3)
MAX1459 Communication Software,
which enables
programming of the MAX1459 from a computer (IBM
compatible), one module at a time.
4)
Interface Adapter and Cable,
which allow the con-
nection of the evaluation board to a PC parallel port.
MAX1459
Pilot Production System
Maxim understands that one of the biggest challenges
in pressure sensor design is the transition from proto-
type to production. To simplify this transition, Maxim
has developed the fully automated pilot production
system for volume applications.
The system consists of the Maxim 14XXDASBOARD
plus one or more 14XXMUXBOARD modules, a DVM,
an environmental chamber, and a pressure controller.
Only the 14XXDASBOARD and the 14XXMUXBOARD
modules are available through Maxim. The DVM, envi-
ronmental chamber, and pressure controller must be
acquired through other vendors.
The 14XXDASBOARD, in conjunction with the
14XXMUXBOARD modules, allow compensation of up to
112 units. IEEE-488 commands select the active DUT
and communicate with the MAX14XX application cir-
cuits. All system voltage measurements are multiplexed
for use with a single external DVM. Each DUT interfaces
to the 14XXMUXBOARD by means of a general-purpose
transition board, which provides digital interface signals
and low-noise analog inputs. The 14XXDASBOARD is
required to operate the 14XXMUXBOARD. All driver soft-
ware is incorporated into the 14XXDASBOARD firmware.
Sensor compensation procedure is implemented using
National Instruments’ LabView program.
M
2-Wire, 4–20mA
Smart Signal Conditioner
______________________________________________________________________________________
21
M
DIO
OUT
V
DD
CS
MODULE 1
SCLK
V
SS
V
SS
V
DD
V
DD
V
SS
TEST
OVEN
M
DIO
OUT
CS
MODULE 2
SCLK
DIO
VOUT
DIGITAL
MULTIPLEXER
+5V
CS[1:N]
CS1
BDRIVE
INP
INM
BDRIVE
INP
INM
BDRIVE
INP
INM
CS2
CSN
SCLK
M
DIO
OUT
CS
MODULE N
SCLK
DVM
Figure 15. Automated Test System Concept
LabView is a trademark of National Instruments.
相關PDF資料
PDF描述
MAX1459AAP 2-Wire, 4-20mA Smart Signal Conditioner
MAX1459CAP 2-Wire, 4-20mA Smart Signal Conditioner
MAX1460CCM Low-Power, 16-Bit Smart ADC
MAX1460 Low-Power, 16-Bit Smart ADC
MAX1462 Low-Voltage, Low-Power, 16-Bit Smart ADC
相關代理商/技術參數
參數描述
MAX14590ETA+ 制造商:Maxim Integrated Products 功能描述:HIGH-CURRENT OVERVOLTAGE PROTECTOR WITH ADJUSTABLE OVLO - Rail/Tube
MAX14590ETA+T 制造商:Maxim Integrated Products 功能描述:HIGH-CURRENT OVERVOLTAGE PROTECTOR WITH ADJUSTABLE OVLO - Tape and Reel
MAX14591EETA+ 制造商:Maxim Integrated Products 功能描述:HIGH SPEED, OPEN DRAIN CAPABLE LOGIC LEVEL TRANSLATOR - Rail/Tube
MAX14591EETA+T 制造商:Maxim Integrated Products 功能描述:HIGH SPEED, OPEN DRAIN CAPABLE LOGIC LEVEL TRANSLATOR - Tape and Reel
MAX14591EEWA+ 制造商:Maxim Integrated Products 功能描述:HIGH SPEED, OPEN DRAIN CAPABLE LOGIC LEVEL TRANSLATOR - Rail/Tube