參數資料
型號: MAX1022BETX+T
廠商: Maxim Integrated Products
文件頁數: 35/44頁
文件大?。?/td> 0K
描述: IC ADC/DAC 10BIT W/FIFO 36-TQFN
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 2,500
類型: ADC,DAC
分辨率(位): 10 b
采樣率(每秒): 225k
數據接口: MICROWIRE?,QSPI?,串行,SPI?
電壓電源: 模擬和數字
電源電壓: 4.75 V ~ 5.25 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 36-WFQFN 裸露焊盤
供應商設備封裝: 36-TQFN 裸露焊盤(6x6)
包裝: 帶卷 (TR)
MAX1020/MAX1022/MAX1057/MAX1058
10-Bit, Multichannel ADCs/DACs with FIFO,
Temperature Sensing, and GPIO Ports
40
______________________________________________________________________________________
GPIO INPUT/OUTPUT
CS
tGSU
tGOD
Figure 13. GPIO Timing
LDAC
tLDACPWL
tS
OUT_
±1 LSB
Figure 14.
LDAC Functionality
LDAC Functionality
Drive
LDAC low to transfer the content of the input reg-
isters to the DAC registers. Drive
LDAC permanently
low to make the DAC register transparent. The DAC
output typically settles from zero to full scale within ±1
LSB after 2s. See Figure 14.
Layout, Grounding, and Bypassing
For best performance, use PC boards. Ensure that digi-
tal and analog signal lines are separated from each
other. Do not run analog and digital signals parallel to
one another (especially clock signals) or do not run dig-
ital lines underneath the MAX1020/MAX1022/
MAX1057/MAX1058 package. High-frequency noise in
the AVDD power supply may affect performance.
Bypass the AVDD supply with a 0.1F capacitor to
AGND, close to the AVDD pin. Bypass the DVDD sup-
ply with a 0.1F capacitor to DGND, close to the DVDD
pin. Minimize capacitor lead lengths for best supply-
noise rejection. If the power supply is very noisy, con-
nect a 10
resistor in series with the supply to improve
power-supply filtering.
The MAX1020/MAX1022/MAX1057/MAX1058 TQFN
packages contain an exposed pad on the underside of
the device. Connect this exposed pad to AGND. Refer to
the MAX1258EVKIT for an example of proper layout.
Definitions
Integral Nonlinearity
Integral nonlinearity (INL) is the deviation of the values
on an actual transfer function from a straight line. This
straight line can be either a best-straight-line fit or a line
drawn between the end points of the transfer function,
once offset and gain errors have been nullified. INL for
the MAX1020/MAX1022/MAX1057/MAX1058 is mea-
sured using the end-point method.
Differential Nonlinearity
Differential nonlinearity (DNL) is the difference between
an actual step width and the ideal value of 1 LSB. A
DNL error specification of less than 1 LSB guarantees
no missing codes and a monotonic transfer function.
相關PDF資料
PDF描述
MS27505E17F6P CONN RCPT 6POS BOX MNT W/PINS
MAX186DCAP+T IC ADC 12BIT SERIAL 20-SSOP
MS27474T14B37SB CONN RCPT 37POS JAM NUT W/SCKT
MAX188CCAP+T IC ADC 12BIT SERIAL 20-SSOP
MAX192BEAP+T IC ADC 10BIT SERIAL 20-SSOP
相關代理商/技術參數
參數描述
MAX1023 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:10-Bit, Multichannel ADCs/DACs with FIFO, Temperature Sensing, and GPIO Ports
MAX1023BETX 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:10-Bit, Multichannel ADCs/DACs with FIFO, Temperature Sensing, and GPIO Ports
MAX1026 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference
MAX1026_09 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference
MAX1026_11 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference