參數資料
型號: M38067M8AXXXGP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP80
封裝: 0.65 MM PITCH, PLASTIC, QFP-80
文件頁數: 19/58頁
文件大小: 801K
代理商: M38067M8AXXXGP
25
MITSUBISHI MICROCOMPUTERS
3806 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
A-D Converter
The functional blocks of the A-D converter are described below.
[A-D conversion register]
The A-D conversion register is a read-only register that stores the
result of an A-D conversion. When reading this register during an
A-D conversion, the previous conversion result is read.
[AD/DA control register]
The AD/DA control register controls the A-D conversion process.
Bits 0 to 2 select a specific analog input pin. Bit 3 signals the
completion of an A-D conversion. The value of this bit remains at
“0” during an A-D conversion, and changes to “1” when an A-D
conversion ends. Writing “0” to this bit starts the A-D conversion.
Bits 6 and 7 are used to control the output of the D-A converter.
[Comparison voltage generator]
The comparison voltage generator divides the voltage between
AVSS and VREF into 256, and outputs the divided voltages.
[Channel selector]
The channel selector selects one of the ports P60/AN0 to P67/AN7,
and inputs the voltage to the comparator.
Fig.18 Structure of AD/DA control register
Fig. 19 Block diagram of A-D converter
[Comparator and Control circuit]
The comparator and control circuit compares an analog input volt-
age with the comparison voltage, then stores the result in the A-D
conversion register. When an A-D conversion is complete, the
control circuit sets the AD conversion completion bit and the AD
interrupt request bit to “1”.
Note that the comparator is constructed linked to a capacitor, so
set f(XIN) to 500 kHz or more during an A-D conversion.
AD/DA control register
(ADCON : address 003416)
Analog input pin selection bits
0 0 0: P60/AN0
0 0 1: P61/AN1
0 1 0: P62/AN2
0 1 1: P63/AN3
1 0 0: P64/AN4
1 0 1: P65/AN5
1 1 0: P66/AN6
1 1 1: P67/AN7
AD conversion completion bit
0: Conversion in progress
1: Conversion completed
Not used (return "0" When read)
DA1 output enable bit
0: DA1 output disabled
1: DA1 output enabled
DA2 output enable bit
0: DA2 output disabled
1: DA2 output enabled
b7
b0
b2 b1 b0
Channel
selector
A-D control circuit
A-D conversion register
Resistor ladder
VREF AVSS
Comparator
A-D interrupt request
b7
b0
3
8
P60/AN0
P61/AN1
P62/AN2
P63/AN3
P64/AN4
P65/AN5
P66/AN6
P67/AN7
Data bus
(Address 0035 16)
AD/DA control register
(Address 0034 16)
相關PDF資料
PDF描述
M38063E6GP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP80
M38062M4DXXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP80
M38067ECAGP 8-BIT, OTPROM, 10 MHz, MICROCONTROLLER, PQFP80
M38063E6-XXXGP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP80
M38067M8AXXXFP 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
M38067MC-130GP 制造商:Renesas Electronics Corporation 功能描述:MCU - Trays
M38067RFS 制造商:Renesas Electronics Corporation 功能描述:EMULATION MCU/8BIT CMOS EMULATION CHIP - Bulk
M38067T-ADF 功能描述:DEV TEMPORARY TARGET BOARD FOR M RoHS:否 類別:編程器,開發系統 >> 配件 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 標準包裝:1 系列:- 附件類型:USB 至 1-Wire? RJ11 適配器 適用于相關產品:1-Wire? 設備 產品目錄頁面:1429 (CN2011-ZH PDF)
M3806-BK002 制造商:Alpha Wire 功能描述:
M3806-BLACK-1000 制造商:Alpha Wire 功能描述: