參數資料
型號: M38039MFL-XXXWG
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 16.8 MHz, MICROCONTROLLER, PBGA64
封裝: 6 X 6 MM, 0.65 MM PITCH, PLASTIC, FLGA-64
文件頁數: 117/121頁
文件大?。?/td> 2071K
代理商: M38039MFL-XXXWG
Rev.1.01
Jan 25, 2008
Page 93 of 117
REJ03B0212-0101
3803 Group (Spec.L)
Countermeasures against noise
(1) Shortest wiring length
1. Wiring for RESET pin
Make the length of wiring which is connected to the RESET
pin as short as possible. Especially, connect a capacitor across
the RESET pin and the VSS pin with the shortest possible
wiring (within 20mm).
<Reason>
The width of a pulse input into the RESET pin is determined by
the timing necessary conditions. If noise having a shorter pulse
width than the standard is input to the RESET pin, the reset is
released before the internal state of the microcomputer is com-
pletely initialized. This may cause a program runaway.
Fig 90. Wiring for the RESET pin
2. Wiring for clock input/output pins
Make the length of wiring which is connected to clock I/O
pins as short as possible.
Make the length of wiring (within 20 mm) across the
grounding lead of a capacitor which is connected to an
oscillator and the VSS pin of a microcomputer as short as
possible.
Separate the VSS pattern only for oscillation from other VSS
pat-terns.
<Reason>
If noise enters clock I/O pins, clock waveforms may be
deformed. This may cause a program failure or program
runaway. Also, if a potential difference is caused by the noise
between the VSS level of a microcomputer and the VSS level of
an oscillator, the correct clock will not be input in the
microcomputer.
Fig 91. Wiring for clock I/O pins
(2) Connection of bypass capacitor across VSS line and VCC line
In order to stabilize the system operation and avoid the latch-up,
connect an approximately 0.1
F bypass capacitor across the VSS
line and the VCC line as follows:
Connect a bypass capacitor across the VSS pin and the VCC pin
at equal length.
Connect a bypass capacitor across the VSS pin and the VCC pin
with the shortest possible wiring.
Use lines with a larger diameter than other signal lines for VSS
line and VCC line.
Connect the power source wiring via a bypass capacitor to the
VSS pin and the VCC pin.
Fig 92. Bypass capacitor across the VSS line and the
VCC line
RESET
Reset
circuit
Noise
VSS
N.G.
Reset
circuit
VSS
RESET
VSS
O.K.
Noise
XIN
XOUT
VSS
N.G.
XIN
XOUT
VSS
O.K.
VSS
VCC
VSS
VCC
N.G.
O.K.
相關PDF資料
PDF描述
M38039FFLHP 8-BIT, FLASH, 16.8 MHz, MICROCONTROLLER, PQFP64
M38039FFLWG 8-BIT, FLASH, 16.8 MHz, MICROCONTROLLER, PBGA64
M38039MFL-XXXKP 8-BIT, MROM, 16.8 MHz, MICROCONTROLLER, PQFP64
M38039FFLSP 8-BIT, FLASH, 16.8 MHz, MICROCONTROLLER, PDIP64
M38039FFLKP 8-BIT, FLASH, 16.8 MHz, MICROCONTROLLER, PQFP64
相關代理商/技術參數
參數描述
M38049FFFP#U0 制造商:Renesas Electronics Corporation 功能描述:
M38049FFLHP#U0 制造商:Renesas Electronics Corporation 功能描述:
M38049RLSS 功能描述:DEV EMULATOR CHIP RAM 2KB 64SDIP RoHS:否 類別:編程器,開發系統 >> 內電路編程器、仿真器以及調試器 系列:- 產品變化通告:Development Systems Discontinuation 19/Jul/2010 標準包裝:1 系列:* 類型:* 適用于相關產品:* 所含物品:*
M3806 功能描述:電纜固定件和配件 LTSCG 625 BLACK RoHS:否 制造商:Heyco 類型:Cable Grips, Liquid Tight 材料:Nylon 顏色:Black 安裝方法:Cable 最大光束直徑:11.4 mm 抗拉強度:
M3806 BK001 制造商:Alpha Wire Company 功能描述:CBL 8COND 18AWG BLK 1000'