參數資料
型號: M37542M2V-XXXGP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP32
封裝: 7 X 7 MM, 0.80 MM PITCH, PLASTIC, LQFP-32
文件頁數: 101/139頁
文件大?。?/td> 1448K
代理商: M37542M2V-XXXGP
7542 Group
Rev.3.02
Oct 31, 2006
Page 64 of 134
REJ03B0006-0302
Fig. 81 State transition
STP mode
f(XIN) oscillation: stop
On-chip oscillator: stop
WAIT mode 1
WAIT mode 2
WAIT mode 3
WAIT mode 3’
Operation clock source: On-chip oscillator (Note 2)
Operation clock source: f(XIN) (Note 1)
Notes on switch of clock
(1) In operation clock = f(XIN), the following can be selected for the CPU clock division ratio.
f(XIN)/2 (high-speed mode)
f(XIN)/8 (middle-speed mode)
f(XIN) (double-speed mode, only at a ceramic oscillation)
(2) In operation clock = On-chip oscillator, the following can be selected for the CPU clock division ratio.
ROSC/1 (On-chip oscillator double-speed mode)
ROSC/2 (On-chip oscillator high-speed mode)
ROSC/8 (On-chip oscillator middle-speed mode)
ROSC/128 (On-chip oscillator low-speed mode)
(3) After system is released from reset, and state transition of state 2 → state 3 and state transition of state 2’ → state 3’,
ROSC/8 (On-chip oscillator middle-speed mode) is selected for CPU clock.
(4) Executing the state transition state 3 to 2 or state 3 to 3’ after stabilizing XIN oscillation.
(5) When the state 2 → state 3 → state 4 is performed, execute the NOP instruction as shown below
according to the division ratio of CPU clock.
1. CPUM76 = 102 (state 2 → state 3)
2. NOP instruction
Transition from Double-speed mode: NOP 3
Transition from High-speed mode: NOP 1
Transition from Middle-speed mode: NOP 0
3. CPU4 = 12 (state 3 → state 4)
(6) When the state 3 → state 2 → state 1 is performed, execute the NOP instruction as shown below
according to the division ratio of CPU clock.
1. CPUM76 = 002 or 012 or 112 (state 3 → state 2)
2. NOP instruction
Transition from On-chip oscillator double-speed mode: NOP 4
Transition from On-chip oscillator high-speed mode: NOP 2
Transition from On-chip oscillator middle-speed mode: NOP 0
Transition from On-chip oscillator low-speed mode: NOP 0
3. CPUM3 = 12 (state 2 → state 1)
WAIT mode 4
State 4
RESET state
f(XIN) oscillation: enabled
On-chip oscillator: enabled
State 3
State 3’
WAIT mode 2’
State 2’
State 2
State 1
Interrupt
STP
instruction
Interrupt
WIT
instruction
Interrupt
CPUM3=02
CPUM3=12
CPUM76=102
(Note 3)
CPUM76=002
012
112
(Note 4)
CPUM76=102
(Note 3)
CPUM76=002
012
112
MISRG1=12
MISRG1=02
MISRG1=12
(Note 4)
MISRG1=02
Reset
released
(Note 3)
CPUM4=02
CPUM4=12
Interrupt
WIT
instruction
WIT
instruction
Interrupt
WIT
instruction
Interrupt
WIT
instruction
Interrupt
WIT
instruction
STP
instruction
STP
instruction
STP
instruction
Interrupt
f(XIN) oscillation: enabled
On-chip oscillator: stop
f(XIN) oscillation: enabled
On-chip oscillator: enabled
f(XIN) oscillation: enabled
On-chip oscillator: enabled
f(XIN) oscillation: enabled
On-chip oscillator: enabled
f(XIN) oscillation: enabled
On-chip oscillator: enabled
Oscillation stop detection circuit valid
f(XIN) oscillation: stop
On-chip oscillator: enabled
相關PDF資料
PDF描述
M37542M2V-XXXGP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP32
M37542M2-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32
M37542F8SP 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDIP32
M37542F8FP 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO36
M37542F8GP 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP32
相關代理商/技術參數
參數描述
M37542M2-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37542M2-XXXGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37542M2-XXXHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37542M2-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37542M4-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER