參數資料
型號: M37542F8GP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PQFP32
封裝: 7 X 7 MM, 0.80 MM PITCH, PLASTIC, LQFP-32
文件頁數: 5/68頁
文件大小: 1191K
代理商: M37542F8GP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
7542 Group
MITSUBISHI MICROCOMPUTERS
13
PRELIMINAR
Y
Notice:
This
is not
a final
specification.
Some
parametric
limits
are
subject
to change.
[CPU mode register] CPUM
The CPU mode register contains the stack page selection bit, etc..
This register is allocated at address 003B16.
Switching method of CPU mode register
Switch the CPU mode register (CPUM) at the head of program af-
ter releasing Reset in the following method.
Fig. 12 Switching method of CPU mode register
Fig. 11 Structure of CPU mode register
After releasing reset
Switch the oscillation mode
selection bit (bit 5 of CPUM)
Switch the clock division ratio
selection bits (bits 6 and 7 of CPUM)
Main routine
Start with a built-in ring oscillator
An initial value is set as a ceramic
oscillation mode. When it is switched to an
RC oscillation, its oscillation starts.
Select 1/1, 1/2, 1/8 or ring oscillator.
Wait by ring oscillator operation until
establishment of oscillator clock
When using a ceramic oscillation, wait until
establlishment of oscillation from oscillation starts.
When using an RC oscillation, wait time is not
required basically (time to execute the instruction to
switch from a ring oscillator meets the requirement).
Oscillation mode selection bit (Note 1)
0 : Ceramic oscillation
1 : RC oscillation
CPU mode register
(CPUM: address 003B16, initial value: 8016)
Stack page selection bit
0 : 0 page
1 : 1 page
Clock division ratio selection bits
b7 b6
0
0 : f(
φ) = f(XIN)/2 (High-speed mode)
0
1 : f(
φ) = f(XIN)/8 (Middle-speed mode)
1
0 : applied from ring oscillator
1
1 : f(
φ) = f(XIN) (Double-speed mode)(Note 2)
Ring oscillator oscillation control bit
0 : Ring oscillator oscillation enabled
1 : Ring oscillator oscillation stop
XIN oscillation control bit
0 : Ceramic or RC oscillation enabled
1 : Ceramic or RC oscillation stop
Processor mode bits (Note 1)
b1 b0
0
0 Single-chip mode
0
1
0
1
Not available
b7
b0
2: These bits are used only when a ceramic oscillation is selected.
Note 1: The bit can be rewritten only once after releasing reset. After rewriting
it is disable to write any data to the bit. However, by reset the bit is
initialized and can be rewritten, again.
(It is not disable to write any data to the bit for emulator MCU
“M37542RSS”.)
Do not use these when an RC oscillation is selected.
相關PDF資料
PDF描述
M37542M4-XXXSP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PDIP32
M37542F8SP 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PDIP32
M37542F8VGP 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PQFP32
M37542F8FP 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PDSO36
M37542F8VFP 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO36
相關代理商/技術參數
參數描述
M37542F8GP#U0 功能描述:MCU 3/5V 32K+4K PB-FREE 32-LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 標準包裝:250 系列:80C 核心處理器:8051 芯體尺寸:8-位 速度:16MHz 連通性:EBI/EMI,I²C,UART/USART 外圍設備:POR,PWM,WDT 輸入/輸出數:40 程序存儲器容量:- 程序存儲器類型:ROMless EEPROM 大小:- RAM 容量:256 x 8 電壓 - 電源 (Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-LCC(J 形引線) 包裝:帶卷 (TR)
M37542F8GPSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP MICROCOMPUTER
M37542F8HP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37542F8SP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37542F8SP#U0 制造商:Renesas Electronics Corporation 功能描述:MCU 4.0/5.5V 32K PB-FREE 32-SDIP - Trays